M-Audio LX4 warranty Appendix a Technical Specifications, Dynamic Range 100dB

Page 14

Appendix A - Technical Specifications

Type: 3-way studio reference with subwoofer (2.1 System), expandable to 5.1

Subwoofer Driver: 8 inch diameter, specially-developed curved-profile pulp cone, high-temperature voice coil and damped closed cell foam surround - designed for sub-frequency pressure levels with very high efficiency and extremely low distortion

LF Driver: 4-inch dia.,magnetically-shielded with curved mineral-filled polypropylene cone, high temperature voice coil and damped closed cell foam surround

HF Driver: 1-inch dia., magnetically-shielded; specially-shaped mylar dome

Frequency Response: 40Hz - 20kHz

Crossover Frequencies: 2.9kHz and 140Hz

RMS SPL @ 1 meter: 105dB

Subwoofer Amplifier Power: 60W

Sat Amplifier Power: 27W (Five Sat Amplifiers)

Dynamic Range: >100dB

S/N Ratio: >100dB below full output, 20kHz bandwidth

Input Connectors: Six TRS balanced/unbalanced input connectors (L, R, SL, SR, C & LFE)

Polarity: Positive signal at + input produces outward low-frequency cone displacement

Input Impedance: 20k ohms balanced, 10k ohms unbalanced

Input Sensitivity, Sat: Input 100 mV pink-noise produces 90dBA output SPL @ 1meter w/ vol ctl at max setting

Input Sensitivity, LFE: input 50mV pink-noise produces 90dBA output SPL @ 1meter w/ vol cntrl at max setting

Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external main fuse

Indicators: Green-Orange Power/Protection indicator (Back Panel). When the power switch is switched to ON, the LED will glow “Green”. When the Protection circuitry of power amplifiers is turned on , the LED will glow “Orange.” At the same time, the output level will reduce 12dB.

Power Requirements: Dual-voltage (selectable by rear-panel switch) for either 120V/~60Hz, 230V/~50Hz; powered via detachable 3-circuit line cord

Cabinets: vinyl-laminated MDF

Dimensions - L, R, SL, SR & C: 8.5” (H) x 5.75” (W) x 6.75” (D)

Dimensions - Subwoofer: 15.75” (H) x 9.75 “ (W) x 12.25” (D)

Weight - L, R, SL, SR & C: 4.5 lbs. each

Weight - Subwoofer: 21.9 lbs.

* All specifications subject to change without notice

14

Image 14
Contents Studiophile LX4 System User GuideIntroduction What’s in the Box?Studiophile LX4 Surround System Features Speaker Enclosure Front and Rear Panel Features LX4-2.1 Subwoofer, RearLX4-2.1 Subwoofer, Front LX4 Satellite Speaker, Rear Installation LX4-2.1 SystemPrecautions LX4 Satellite Speaker, FrontSpeaker Wire Connections TRS Balanced/Unbalanced ConnectionsInstallation LX4-5.1 Expander Connecting to Preamp, Computer or Game Console OutputsPlacing the Speakers LX4-2.1 System Page Placing the Speakers LX4-5.1 Expander Technical Support & Contact Information Audio U.SWarranty Terms Warranty RegistrationAppendix a Technical Specifications Dynamic Range 100dBAppendix B Block Diagram