Samsung LS22PTESF/XV manual Not available when MagicBright is set to Dynamic Contrast

MENU			DESCRIPTION
Contrast / Brightness /	You can use the on-screen menus to change the contrast and brightness according to personal pref-
Sharpness	erence.
	• <Contrast> - Adjusts the contrast level of the picture.
	• <Brightness> - Adjusts the brightness level of the picture.
	• <Sharpness> - Adjusts the edge definition of the picture.
			Not available when <MagicBright> is set to <Dynamic Contrast>.
Auto Adjustment	The values of <Fine>, <Coarse> and <PC Position> are adjusted automatically.
	By changing the resolution in the control panel, auto function is performed.
			Available in <PC> Mode only.
			Press the [TOOLS] button to display the Tools menu. You can also set the <Auto Adjustment> by
	selecting <Tools>→<Auto Adjustment>.
Screen	•	<Coarse>
		Removes noise such as vertical stripes.
		<Coarse> adjustment may move the screen image area. You may relocate it to the centre using
		the horizontal control menu
	•	<Fine>
		Removes noise such as horizontal stripes.
		If the noise persists even after <Fine> tuning, repeat it after adjusting the frequency (<Coarse>.)
	•	<Position>
		Adjusts the screen location horizontally and vertically.
	•	<Image Reset>
		Image parameters are replaced with the factory default values.
			Available in <PC> Mode only.
Picture Options	•	<Colour Tone>
		The tone of the colour can be changed.
			Available in <PC> mode only.
		•	<Cool> - <Normal> - <Warm> - <Custom>
	• <R-Gain> - <G-Gain> - <B-Gain>
		Adjusts the individual R, G, B (Red, Green, Blue) colour controls.
	•	<Size>
		You can switch the Size.
		•	<16:9> - <4:3>
Reset	Picture parameters are replaced with the factory default values.
	•	<OK> - <Cancel>

Using the Product 3-4