1Preparations
1.3Installation
1.3.1 Attaching the Stand
Before assembling the product, place the product down on a flat and stable surface so that the screen
is facing downwards.
Insert the stand neck into the stand base in the direction shown in the figure.
Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards.
Check that the stand neck is firmly connected.
Hold the main body of the product with your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in the figure.
Tightly fasten the connecting screw at the bottom of the stand base.
- Caution
Do not hold the product upside down only by the stand.
1 Preparations 22