Samsung EC-D200ZSBA/E1, EC-D200ZSBA/US Before Contacting a Service Center, Symptoms Causes Steps

BEFORE CONTACTING A SERVICE CENTER

Symptoms	Causes	Steps
The power is not	The batteries need replacing	Replace the batteries with new ones
turned on	The AC Power Adapter is not connected	Connect the AC Power Adapter
	The batteries need replacing	Replace the batteries with new ones
	The camera has automatically turned itself	Power on.
The power is	off.
	The card is taken out before the image is	Do not remove the memory card while you
turned off during
use	saved onto it.	save the image.
	The adapter has not been connected	Plug the adapter in correctly
	properly
The battery	The external temperature is too cold	Keep batteries at the correct temperature
power is draining	The camera is using both old and new	Replace all batteries with new ones
quickly	batteries
Camera does not	The camera is not set to RECORD mode	Set it to RECORD mode
	SmartMediaTM card is not inserted	After turning off the camera, insert the Card
take pictures	The memory card has not been initialized.	Initialize
when the Shutter
	Memory card is almost drained	Insert new Card from manufacturer
button is being
	The batteries are weak	Replace the batteries with new ones
pressed
	The power has not been switched on	Power on
The focus cannot	You have selected the incorrect shooting	If the subject is closer than 0.6m, select
	mode	macro mode and if the subject is beyond
be adjusted
		0.6m, select normal mode
The flash does	The camera flash is turned off	Please change the flash mode to Fill in or
not work		Auto
The incorrect	The wrong date/time is displayed or has	Select the appropriate date in SETUP mode
date/time is
	been saved as basic numbers
displayed
Camera fails to
work by any	Camera is not working properly	Remove the batteries and insert them again.
button or switch