Samsung EC-A402ZRBA/US, EC-D420ZSAA, EC-A402ZBAA manual Instructions on how to use the memory card

Page 15

Instructions on how to use the memory card

Maintenance of the memory card

Be sure to format the memory card (see p.72) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognize, or if it contains images captured with a different camera.

Turn off the camera power whenever the memory card is being inserted or removed.

Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card.

Wear and tear on the memory card is not covered by the Samsung warranty.

The memory card is an electronic precision device.

Do not bend, drop or subject the memory card to any heavy impact.

Do not store the memory card in an environment with strong electronic or magnetic fields, e.g. near loud speakers or TV receivers.

Please do not use or store in an environment where there are extremes in temperature.

Do not allow the memory card to become dirty or to come into contact with any liquid. Should this happen, clean the memory card with a soft cloth.

Please keep the memory card in its case when not in use.

During and after periods of extended use, you may notice that the memory card is warm. This is perfectly normal.

Do not use a memory card that is used in another digital camera.

To use the memory card in this camera, format first the memory card by using this camera.

Do not use a memory card formatted by another digital camera or memory card reader.

Preserving the memory card data

If the memory card is subjected to any of the following, the recorded data may become corrupted :

-When the memory card is used incorrectly.

-If the power is switched off or the memory card is removed while recording, deleting (formatting) or reading.

Samsung cannot be held responsible for lost data.

It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard disks, CD etc.

If there is insufficient memory available : If you press the shutter button for the shot, a [CARD FULL !] message will appear and the camera will not operate. To optimize the amount of memory in the camera, replace the memory card or delete unnecessary images stored on the memory.

15

Image 15
Contents English Instructions Contents Dpof Standard Dpof CancelFAQ DpofAbout the icons Getting to know your camera《6》 An FCC warning Camera strap AC cordSBC-N1 SBC-L1 System chart ComputerSee p.95 Back & Bottom Identification of featuresShutter button Flash Self-timer lamp Strap eyelet Lens Front & TopMemory card slot Mode buttonBattery chamber cover Side / 5-function buttonAuto Program PlayNight Portrait Landscape CR-V3 type Lithium Ion battery Instructions on how to use the power sourceInsert the batteries taking note of the polarity + Connecting to a Power SourcePolarity + ArrowInstructions on how to use the memory card Super Fine InformationRemoving the memory card Inserting the memory cardLCD monitor indicator LCD monitor indicator Starting the recording modePress the shutter button to capture an image Image size 640X480, 320X240 Selectable File type *. Avimjpeg Starting the recording mode《21》 Things to watch out for when taking pictures Using the camera buttons to adjust the camera Stops digital zooming Zoom W/T buttonBar Wide Zoom Digital zoom WideDown button Voice memo / UP buttonFlash range Focus type Flash / Left buttonLCD monitor Flash off Flash mode indicator Icon DescriptionAutomatically Reduction functionSelf-timer / Right button MENU/ OK button +/- button 100, 200 Scene menu and press the Right button Exposure compensationLCD button Using the LCD monitor to adjust the camera settings Load SingleEffect OFFMode How to use the menu2272 2048 1600 1024 640 320 SizeAvi Still Image mode Movie Clip modeQuality JpegSpot MeteringSepia Continuous shotEffect Fine NormalAvailable photo frames are as follows Photo FrameSharpness SoftVivid Press the right button Slot number to loadSaved in the Myset slot 100-0009 Starting play mode Images is the same as the method of playing back voice Files Connect the camera to your PC100-0009 Thumbnail / Enlargement buttonTrim CancelCancels trimming Voice memo / Up buttonVoice memos can’t be recorded onto movie clip files Play & Pause / Down buttonLEFT/ RIGHT/ MENU/ OK button Delete button Cancels Delete ImageProtect ONE PIC Setting up the play back function using the LCD monitorSlide Repeat ResizeMenu tab Main menu Sub menu Secondary menu PrintDpof Print Reset Custom SET※ Menus are subject to change without prior notice Loading time depends on the image size and quality Press the OK button to save the configurationStarting the slide show On selectedRotating an image HorizontalVertical 1536 1200 768 480 ResizeImage Resize Types 2048X 1600X 1024X 640X LogoLock Protecting imagesALL Pics UnprotectedButton and press the OK button Selecting no Cancels Delete AllDeleting all images ALL menu tabRecordings Press the OK button to confirm the settingPress the LEFT/ Right button and select the Dpof menu tab Current picture onlyIf Index is selected Setting the Print SizeSelect the Cancel menu by pressing the UP/ Down Select a desired sub menu by pressing the UP/ DownYES All images saved in the internal memory are Cancels Copy to CardHas been completed, the screen will return to play mode LEFT/ Right buttonPrinter Setup PictBridgeImages PictBridge Picture Selection PictBridge Printing StandardPrint the pictures stored in the memory AUTO, OFF, on PictBridge Print SettingAuto SET AUTO, DRAFT, NORMAL, FineIf no is selected Settings will not be reset PictBridge ResetSetup menu Series Setup menuFile name USB Computer PrinterFile name Auto power offIndonisia and Arabic LanguageSelect the Language menu by pressing the UP Button and press the OK button Language sub menuButton and press the OK button If no is selected Formatting a memory cardSelect the Time menu by pressing the UP/ Down Setting up the DateSetting up the Time Select the Date menu by pressing the UP/ DownDate & Time will not be imprinted on the image file Date typeImprinting the recording date Imprint type, and then press the OK buttonSelecting an External Device USB BeepQuick view InitializationRESET ALLBeep OFF Setting up the Mycam menuTurned on Setting a Startup Image Start up imageSelect the S.BEEP menu by pressing the UP/ Down Start up soundImportant notes 《80》 《81》 Before contacting a service centre ㆍThere is low battery capacity → Insert fresh batteriesPlease check the following Before contacting a service centre ㆍAn Incorrect focus mode is selected→ Reset the date and time correctly ㆍCable connection is incorrect ㆍExposure is excessive → Reset exposure compensationLCD Specifications2272 2272X1704 2048 Image Size Primary battery 2 x AA alkaline, Lithium, Ni-MnPower Source Rechargeable battery 2 x AA Ni-MHSystem Requirements Software NotesAbout the software Setting up the application software About the application program Frame 8 may not appear according to System requirements Select Components window will appear. Click Next button 《93》 《94》 Camera driver must be installed before using PC mode Starting PC modeCut 《97》 Removing the USB Driver for Windows 98SE Removable Disk Removing the removable disk Using the USB Driver for MAC Setting up the USB Driver for MACDigimax Viewer PropertyEtc Using PhotoImpression FAQ Win XP Manager → Universal Serial Bus controllersWin → Device Manager → Universal Serial Bus controllers《106》 《107》 6806-2560
Related manuals
Manual 108 pages 28.95 Kb