Samsung WW80K5233YW/SV manual Operations

Operations

Operations

Press to change the spinning speed for the current cycle.

•Rinse Hold (No indicator): The final rinse process is suspended so that the laundry remains in the water. To unload the laundry, run a drain or spin process.

05	Spin	•	No Spin : The drum does not spin after the final drain process.
		•	Spin Only : To run the Spin Only cycle, press Spin for 3 seconds.
			When the cycle time and spinning speed appear, press Spin
			repeatedly until a desired spinning speed is selected. Then, press
			Start/Pause to start the cycle. The spinning time depends on the
			selected cycle.
		Press to select an option from Intensive, Pre Wash, Press again to
06	Options	deselect.

•Availability of the options depends on the cycle.

07	Bubble Soak	Press to activate/deactivate the Bubble Soak function. This
		function helps remove a wide variety of stubborn stains.
		Delay End lets you set the end time of the current cycle. Based
		on your settings, the start time of the cycle will be determined
08	Delay End	by the machine’s internal logic. For example, this setting is useful
		for programming your machine to finish a wash at the time you
		normally return home from work.
		• Press to choose a preset unit of hours.
		For lightly soiled garments of less than 2 kg that you want to wash
09	Quick Wash	quickly.
		• This option is available only when the COTTON cycle is selected.
	15’/30’
		• The cycle time is subject to change, depending on the detergent
		amount, water level, and contamination level of the load.
10	Power	Press to turn on/off the washing machine.
11	Start/Pause	Press to start or stop operation.

30  English

WW85K5410WW_DC68-03677A-04_EN(Add WW95K5410UW).indd 30

2017/9/5 17:26:45