Operations
Control panel
WW8*K54****
10
02
08
11
| 01 |
|
|
| 09 | |
|
|
|
|
| ||
| 03 | 04 | 05 | 06 | 07 | |
WW7*K52**** |
|
|
|
|
| |
|
|
|
|
| 10 | |
| 02 |
|
|
|
| |
|
|
|
|
| 08 | |
| 01 |
|
|
| 11 | |
|
|
|
| 09 | ||
|
|
|
|
| ||
| 03 | 04 | 05 | 06 | 07 | |
01 Cycle Selector | Turn the dial to select a cycle. |
|
|
|
| |
02 Display | The display shows current cycle information and estimated time | |||||
remaining, or an information code when a problem occurs. | ||||||
| ||||||
03 Temp. | Press to change the water temperature for the current cycle. | |||||
Cold ( ) means no temperature setting selected. |
| |||||
|
| |||||
04 Rinse | Press to change the rinse count for the current cycle. You can set the | |||||
rinse count to a max of 5, depending on the cycle. |
| |||||
|
|
Press to change the spinning speed for the current cycle.
•Rinse Hold (No indicator): The final rinse process is suspended so that the laundry remains in the water. To unload the laundry, run a drain or spin process.
05 Spin | • | No Spin : The drum does not spin after the final drain process. | ||
• | Spin Only : To run the Spin Only cycle, press Spin for 3 seconds. | |||
| ||||
|
| When the cycle time and spinning speed appear, press Spin | ||
|
| repeatedly until a desired spinning speed is selected. Then, press | ||
|
| Start/Pause to start the cycle. The spinning time depends on the | ||
|
| selected cycle. | ||
|
|
|
| |
|
| English | 29 |
Operations
2017/7/5 10:02:02