Samsung HW-MS750/XV manual Connecting via Wi-Fi, Disconnecting the Soundbar from the TV

NOTES

•• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

•• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 10 meters.

•• The Soundbar automatically turns off after 5 minutes in the Ready state.

•• The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances:

––If there is a strong electrical field around the Soundbar.

––If several Bluetooth devices are simultaneously paired with the Soundbar.

––If the Bluetooth device is turned off, not in place, or malfunctions.

•• Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

Disconnecting the Soundbar from the TV

Press the (Source) button on the right side panel or on the remote control and switch to any mode but “BT”.

•• Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.)

•• To cancel automatic Bluetooth connection between the Soundbar and TV, press the

p(Play/Pause) button on the remote control for 5 seconds in “BT READY” status. (Toggle On → Off)

Connecting via Wi-Fi

Pre-connection Checklist

1.Confirm that your Samsung smart TV was released after 2014. This function is compatible only with Samsung smart TVs released after 2014.

2.Make sure your Wireless router (Wi-Fi)is ready and working.

3.Make sure that the TV is connected to the Wireless router (your Wi-Fi network).

ENG - 10