SETTING TIMER
This advanced Timer function allows you to tur
your air conditioner automatically even when you are
away. Simply set the time and your air conditioner will tur
automatically.
On timer
This function allows you to turn on the air conditioner automatically within the time range of 24 hours.
.
1. Press the On Timer button on the remote control.
On timer indicator blinks on the remote control display.
2.Set the time you want the air conditioner to turn on
automatically.
Press the Time 
or 
button on the remote control to change the time setting while On timer indicator is blinking.
You can set the time up to 24 hours, increasing in
3.Press the Set/Cancel button on the remote control to active it on.
The remote control display will show the hour(s) you have set for 3 seconds and set desired temperature will display.
The air conditioner will operate automatically at set time and then Ontimer indicator stops blinking and stays on. If On timer is not set within 10 seconds, the air conditioner will end setting.
4.Set the operating mode.
Press the Mode button on the remote control until the desired mode appears on the remote control display.
The air conditioner will operate in the mode you set.
On timer function is available in Auto/Cool/Dry/Fan/ mode.
• Temperature can also be adjusted. (See step 3 on page 14 for instructions.)
• 
, approximately after 10 seconds, all the other indicators will be gone except the On timer indicator.
• Time setting can be changed by pressing the On Timer button.
Press the Time | or | button to change time setting and then press the Set/Cancel |
button to active it on. |
| |
To deactivate the On timer
1.Press the Set/Cancel button on the remote control.
On timer you set will be canceled and On timer indicator will disappear.
20_ using advanced functions