Accessories |
| Using this Instruction Booklet |
Depending on the model that you have purchased, you are supplied with several accessories that can be used in a variety of ways.
1.Coupler, already placed over the motor shaft in the base
of the oven.
Purpose: The coupler rotates the turntable.
2.Roller ring, to be placed in the centre of the oven.
Purpose: The roller ring supports the turntable.
3.Turntable, to be placed on the roller ring with the centre fitting to the coupler.
Purpose: The turntable serves as the main cooking surface; it can be easily removed for cleaning.
4.Metal rack, to be placed on the turntable.
Purpose: The metal rack can be used to cook two dishes at the same time. One dish may be placed on the turntable and the other dish on the rack. The metal rack can be used in grill and combination cooking.
5.Crusty plate(CE2933NT/CE2913NT only), see page 14. Purpose: The crusty plate is used to brown food better in
the microwave or grill combination cooking modes. It helps keep pasty and pizza dough crisp.
☛DO NOT operate the microwave oven without the roller ring and turntable.
You have just purchased a SAMSUNG microwave oven. Your Owner’s Instructions contain much valuable information on cooking with your microwave oven:
•Safety precautions
•Suitable accessories and cookware
•Useful cooking tips
Inside the cover you will find a quick
•Cooking food
•Defrosting food
•Grilling food
•Adding extra cooking time
At the front of the booklet you will find illustrations of the oven, and more importantly the control panel, so that you can find the buttons more easily.
The
☛ ✉ ✽
ImportantNoteCaution
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY
Failure to observe the following safety precautions may result in harmful exposure to microwave energy.
(a)Under no circumstances should any attempt be made to operate the oven with the door open or to tamper with the safety interlocks (door latches) or to insert anything into the safety interlock holes.
(b)Do not place any object between the oven door and front face or allow food or cleaner residues to accumulate on sealing surfaces. Ensure that the door and door sealing surfaces are kept clean by wiping after use first with a damp cloth and then with a soft dry cloth.
(c)Do not operate the oven if it is damaged until it has been repaired by a qualified microwave service technician trained by the manufacturer.
It is particularly important that the oven door closes properly and that there is no damage to the:
(1)Door, door seals and sealing surfaces
(2)Door hinges (broken or loose)
(3)Power cable
(d)The oven should not be adjusted or repaired by anyone other than a properly qualified microwave service technician trained by the manufacturer.
GB
5