Water Supply Connector Filter

	inlet water
	valve
1.Pull out the filter and wash well.	2. Pull in the filter and connect	3. Check if there is a leakage.
	the hose to the inlet water	Note to tighten up the
	valve tightly.	connector.
CLEANING THE FILTER NET	Clean the filter net often to keep the washer clean.

1. Push the upper part	2. Open the cover as	3. Clean the filter.	4. Close the cover and insert the
of the filter and pull in.	shown in the figure.		lower part of the filter in the
			basket first and then push the
			filter with "click" sound .

HOW TO CLEAN THE FILTER

1	. Place a rag under the washer filter not to wet the floor.			(pump drained washer)
2	. Rotate the filter counterclockwise			1.	Place a rag under washer filter not to wet the floor.
	and pull out the filter.			2.	Turn the filter-cap to the left.
3	. Remove dirts and rotate	open	close	3.	Take the filter out and
	the filter clockwise			4.	remove dirts.
	until it locks in position.			4.	Reassemble in
					reverse order.