Installing the Washing Machine

Unpacking the Washing Machine

Unpack your washing machine and inspect it for shipping damage. Also make sure that you have received all of the items shown below. If the washing machine was damaged during shipping or you do not have all of the items, contact your Samsung dealer immediately.

Overview of the washing machine

		Worktop
		Detergent
		drawer
	Control panel	Drain Hose
	Control panel	Door
		Door
		Plug
	Base cover
	Adjustable feet	Debris filter
		Debris filter
		Emergency drain
		tube
		Filter-cover
		Cold Water
	Wrench	supply hose
	Wrench
		Drain hose
	Hose guide	Bolt hole
	Hose guide	covers
		covers

Installing the Washing Machine

Selecting a location

Before you install the washing machine, select a location with the following characteristics:

•A hard, level surface (if the surface is uneven, see "Adjusting the leveling feet," below)

•Away from direct sunlight.

•Adequate ventilation

•Room temperature that will not fall below 0 ˚C

•Away from sources of heat such as coal or gas

Make sure that the washing machine does not stand on its power cord.

Ventilation openings must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

Adjusting the leveling feet

If the floor is uneven, adjust the feet (do not insert pieces of wood or any other objects under the feet):

1.Loosen the leg bolt by turning it with your hand until it is at the desired height.

2.Tighten the locking nut by turning it with the supplied wrench.

•Place the washer on a sturdy, flat surface.

If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Only a l degrees angle is allowed.)

Removing the shipping bolts

Before using the washing machine, you must remove the five shipping bolts from the back of the unit. To remove the bolts:

1 3

1.Loosen all bolts with the supplied wrench before removing them.

2.Take each bolt head and pull it through the wide part of the hole. Repeat for each bolt.

3.Fill the holes with the supplied plastic covers.

4.Keep the shipping bolts for future use.

Connecting the water supply hose(Option)

1. Remove the adaptor from the			4. Connect the water supply hose to the adaptor.
1. Remove the adaptor from the			Pull down part (c) of the water supply hose.
water supply hose.			Pull down part (c) of the water supply hose.
		c	When you release part (c) the hose automatically
			connects to the adaptor making a ’click’ sound.
2. First, using a “+” type screw driver, loosen the			5. Connect the other end of the water supply hose
four screws on the adaptor. Next, take the			to the inlet water valve at the top of the washer.
adaptor and turn part(b) following the arrow until			Screw the hose clockwise all the way in.
there is a 5mm gap.
3. Connect adaptor to the water tap by tightening			• If the water tap has a screw type faucet, connect
the screws firmly.	a		the water supply hose to the tap as shown.
Then, turn part (b) following the arrow and put(a)			the water supply hose to the tap as shown.
Then, turn part (b) following the arrow and put(a)	b
and (b) together.

NOTICE After completing connection, if water leaks from the hose, then repeat the same steps. Use the most conventional type of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the faucet into the adaptor.

2 SAMSUNG Washing Machine Owner’s Instructions

SAMSUNG Washing Machine Owner’s Instructions 3

B1245AVGW/YLW, B1245AVGW1/XEH, B1245AVGW/YLE, B1245AVGW/YLP, B1245AVGW/YLR specifications

The Samsung B1245AVGW1/XEF, B1245AVGW/XEH, and B1245AVGW1/XEH are essential air conditioning units designed to provide efficient cooling and heating solutions for residential and commercial spaces. These models are part of Samsung's commitment to delivering high-performance HVAC systems that cater to the needs of modern users, combining advanced technologies with user-friendly features.

One of the standout characteristics of these models is their Energy Efficiency Ratio (EER), which ensures optimal cooling performance while minimizing energy consumption. This feature not only translates to lower electricity bills for the user but also contributes to a more sustainable environment. With their inverter technology, these air conditioners adjust the compressor speed according to the cooling demand, providing consistent comfort without energy wastage.

Additionally, the B1245AVGW series incorporates a multi-stage filtration system that effectively removes dust, allergens, and pollutants. This is particularly beneficial for households with children or members suffering from allergies, as it enhances indoor air quality significantly. The deodorizing filter also eliminates unpleasant odors, creating a fresher living space.

The sleek design of these models complements modern décor, making them a stylish addition to any room. The quiet operation is another advantage, ensuring that the units deliver comfort without disruptive noise, allowing for a peaceful environment whether it's at home or in an office setting.

Samsung has integrated smart technology into its B1245AVGW series, which allows for seamless connectivity. Users can easily control their air conditioning through smartphone apps or voice assistants, providing convenience in operation. This feature is particularly appealing for tech-savvy consumers who appreciate real-time monitoring of their energy usage.

In terms of installation, the compact nature of these units makes them suitable for a variety of settings, including smaller rooms that require efficient cooling without taking up too much space. The units are designed for easy installation and maintenance, ensuring that users can enjoy uninterrupted performance year-round.

Overall, the Samsung B1245AVGW1/XEF, B1245AVGW/XEH, and B1245AVGW1/XEH are exemplary models in the air conditioning market, bringing together cutting-edge technology, energy efficiency, and user-friendly features that cater to today's lifestyle needs.