M-Audio BX5 user manual

Page 5

The TRS input is summed through a balanced input amplifier with the XLR input, allowing both inputs to be used simultaneously. Input specifications apply to both.

3.PRODUCT LABEL: This label contains the model and serial number information.

4.VENT PORT: This port aids in reproduction of very low frequencies by discharging frequencies below 60 Hz.

5.VOLUME CONTROL: Use the volume control to set the output sound pressure from the BX5 to proper levels as required.

6.LOW CUTOFF: This 3-position switch sets the bass rolloff frequency.The lowest setting, 56Hz, is essentially a low cutoff bypass as it does not attenuate the BX5’s frequency response. Other settings are 80Hz and 100Hz.

7.MID-BOOST: Two selections are available, “In” and “Out.” The Out setting produces a flat frequency response curve, while the In setting gives a boost in the mid-range frequencies.

8.HIGH FREQ: Three settings are possible, -2dB, 0dB, and +2dB. 0dB is a “flat” setting with no attenuation, while the -2dB and +2dB settings will attenuate or boost the high frequencies (3kHz shelf) by -2dB and +2dB respectively.

9.ACOUSTIC SPACE: This 3-position switch is designed to compensate for different speaker placements. Please see the section “Setting the Acoustic Space Switch” for more information.

10.POWER SWITCH:This switch turns the monitor on and off.The on position is indicated with the marking “.” (a white dot).

11.POWER RECEPTACLE: Accepts a detachable 3-circuit line cord in order to power the monitor.

12.FUSE HOLDER: Holds the external main fuse.

13.VOLTAGE-SELECT SWITCH: Provides 2 selections, 115VAC and 230VAC, and should be set to match the “house supply” (receptacle) voltage of the country or location in which the speaker is used.The 115V setting is correct for the USA, while the 230V setting is correct for most of the UK and Europe.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Studiophile BX5 Introduction Studiophile BX5 FeaturesWhat’s in the Box? WooferTweeter Network & Power AmplifiersSub-Frequency Port EQ and Acoustic Space ControlsRear Panel Front and Rear Panel FeaturesPage Front Panel InstallationPrecautions TRS Balanced/Unbalanced Connection XLR Balanced ConnectionConnecting to Preamp, Computer or Game Console Outputs Setting the EQ SwitchesMid-Boost Setting the Acoustic Space Switch Placing the BX5 Appendix a Technical Specifications Appendix B Audio U.S Technical Support & Contact InformationYour BX5 Warranty BX5-111402

BX5 specifications

The M-Audio BX5 is a highly regarded studio monitor that has become a popular choice among both amateur and professional audio engineers. Renowned for its precise sound reproduction and robust build quality, the BX5 is designed to meet the demands of modern music production, making it an essential tool in any studio setup.

One of the standout features of the BX5 is its bi-amplified design, which utilizes separate amplifiers for the low and high frequencies. Each speaker is driven by a powerful 70-watt Class A/B amplifier that provides a clear and accurate response across the frequency spectrum. This design minimizes distortion and allows for better overall sound clarity, making it easier for engineers to mix and master recordings.

The BX5 boasts a 5-inch polypropylene low-frequency driver that delivers a tight and punchy bass response, perfect for genres that rely on rhythm and low-end clarity. Complementing this is a 1-inch silk dome tweeter, which offers a smooth and detailed high-frequency output. Together, these components ensure that the BX5 can reproduce a wide range of frequencies, from deep bass notes to sparkling highs.

Another notable characteristic is the frequency response range of the BX5, which spans from 50 Hz to 22 kHz. This wide range allows users to hear the full spectrum of their audio, providing a more accurate mixing environment. In addition, the BX5 features a rear-firing bass port that enhances low-frequency performance by providing increased bass response. However, this design requires careful placement in a room to avoid unwanted resonance.

The cabinet of the BX5 is constructed from high-density MDF, which helps to reduce cabinet resonance and ensures a clean sound reproduction. Its sleek, curved design not only enhances the aesthetic appeal but also contributes to the reduction of undesirable standing waves, further improving sound quality.

Connectivity is straightforward with balanced XLR and 1/4-inch TRS inputs, making it adaptable to a variety of audio interfaces and setups. The BX5 is designed to fit seamlessly into any studio environment and can be used for both near-field and mid-field monitoring.

Overall, the M-Audio BX5 stands out as a reliable and versatile studio monitor, combining advanced technologies and thoughtful design to deliver superior sound quality. Its affordability without compromising on performance makes it an excellent choice for anyone looking to enhance their audio production experience.
Top Page Image Contents