Samsung MAXWL69QH/XFO manual Connecting your System to the Power Supply

Page 7

Where to Install Your

Mini-Compact System

To take full advantage of your new mini-compact system, follow these installation instructions before connecting the unit.

Install the system on a flat, stable surface.

Never place this unit on carpeting.

Never place this unit in an outdoor area.

Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes.

Make sure that you have enough room to open the compact disc compartment easily.

Place the loudspeakers at a reasonable distance on either side of the system to ensure good stereo sound.

Direct the loudspeakers towards the listening area.

For optimum performance, make sure that both speakers are placed at an equal distance above the floor.

Connecting your System to the Power Supply

The main lead must be plugged into an appropriate socket.

Before plugging your system into a main socket, you must check the voltage.

1	Check the position of the voltage selector on the rear of the system
2	(OPTIONAL).
2	Plug the main lead (marked AC Cord on the rear of the system) into
	an appropriate socket.
3	Press the On/Standby button to switch your mini-compact system on.

Inserting Remote Control Batteries

GB

Insert or replace remote control batteries when you:

Purchase the mini-compact system

Find that the remote control is no longer operating correctly

When replacing the batteries, use a new set of batteries and never mix alkaline and manganese batteries.

1	Place your thumb on the position marked	on the battery
	compartment cover (rear of the remote control) and push the cover in
	the direction of the arrow.
2	Insert two AAA, LR03 or equivalent batteries, taking care to respect
	the polarities:
	+ on the battery against + in the battery compartment
	– on the battery against – in the battery compartment
3	Replace the cover by sliding it back until it clicks into position.

If you will not be using the remote control for a long time, remove the batteries to prevent corrosion.

7

Image 7

Contents THREE-CD Changer MINI-COMPACT System Class 1 Laser Product Safety WarningsContents Bass Front Panel ViewDeck 1/2 Remote ControlTape VOL Tuning Mode On/StandbyMAX-WL69 Rear Panel ViewInsert or replace remote control batteries when you Connecting your System to the Power SupplyWhere to Install Your Mini-Compact System Inserting Remote Control BatteriesTo achieve the correct sound quality, connect Connecting to an External SourceConnecting the Loudspeakers ConnectHow to connect a Wire Type aerial Connecting the AM MW/LW AerialConnecting the FM Aerial How to connect a Coaxial Type aerialViewing Setting the ClockYou can view the various functions available on your system To play Listening to a Compact DiscLoading and Changing Compact Discs Result The compartment opensSearching for a Specific Music Passage on a CD Selecting a CD in the Disc changerSelecting a Track Shuffle Play FunctionTo repeat Programming the Order of PlaybackRepeating One or All Tracks on the Compact Discs You can repeat indefinitelyYou can store up to To search for a Press Tuning Mode StationChecking or Changing Programmed Tracks Searching for and Storing the Radio StationsYou can listen to a stored radio station as follows Press Preset/MemorySelecting a Stored Station Improving Radio ReceptionListening to a Cassette CD Synchro Record FeatureRecording a Compact Disc Press REC/Pause Selecting the Cassette Playback Mode Deck 2 OnlyRecording a Radio Program Copying a Cassette DubbingCancelling the Timer Timer FunctionTo obtain a Power Sound/Surround FunctionSelecting an Equalizer Preset P Function Mute FunctionMicrophone Function option Connecting HeadphonesSetting the System to Switch off Automatically Super Bass SoundPress Push Eject Safety Precautions Cleaning Your Mini-Compact SystemBefore Contacting the After-Sales Service Precautions When Using Compact DiscsPrecautions When Using Audio Cassettes General Technical SpecificationsElectronics