| Hob Use (Continued) |
EN | Switching the child safety lock off |
| 1.. Touch the control sensor for approximately 3 seconds.. |
| An acoustic signal will sound as confirmation. |
approx.. 3 sec..
Timer
There are two ways to use the timer:
Using the timer as a safety shutoff
If a specific time is set for a cooking zone, the cooking zone will shut itself off once this period of time has elapsed.. This function can be used for multiple cooking zones simultaneously..
Using the timer to count down
The countdown timer cannot be used if a cooking zone has been switched on..
Setting the safety shutoff
The cooking zone(s) for which you want to apply the safety shutoff must be switched on..
1..Using the timer’s control sensor 
, select the cooking zone for which the safety shutoff time is to be set..
After the first active cooking zone is selected, touching the timer’s control sensor 
will cause the corresponding indicator to flash slowly.
For example, the front left indicator corresponds to the front left cooking zone.. 
will ap- pear in the timer display..
The next active cooking zone is selected by touching the timer’s control sensor again 
..
20