Using the touch control sensors
To operate the touch control sensors, touch the desired panel with the tip of your pointed finger until the relevant displays illuminate or go out, or until the desired function is activated.
Ensure that you are touching only one sensor panel when operating the appliance. If your finger is too flat on the panel, an adjacent sensor may be actuated as well.
Switching the appliance on
1.Touch the Lock control 
sensor for approximately 3 seconds.
2.The appliance is switched on using the On/Off control 
sensor. Touch the On/Off control 
sensor for 1 second.
The digital displays will show 
.
approx 1 sec.
After the On/Off control 
sensor has been actuated to switch on your appliance, a heat setting must be selected within approximately 10 seconds. Otherwise, the appliance will switch itself off for safety reasons.
seub ho
hob use _21