Samsung DVD-VR325/XEH, DVD-VR325/XEG, DVD-VR325/EUR manual AV Receiver Connections

AV Receiver

Connections

	To take full advantage of the movie theater experience
	that DVD offers, you may want to connect your DVD
	Recorder & VCR to a complete Surround Sound
	system, including an A/V Receiver and six Surround
onnectionsC	Sound speakers.
	the audio settings. (See page 30)
	If your A/V receiver is equipped with a Dolby Digital
	Decoder, you have the option to bypass the DVD
	Recorder & VCR’s built-in Dolby Digital Decoder.
	Use the Digital Audio Out connection below.
	To enjoy Dolby digital or DTS sound, you must set up
		Manufactured under license from Dolby Laboratories.
		“Dolby” and the double-D symbol are trademarks of
		Dolby Laboratories.
		“DTS” and “DTS Digital Out” are trademarks of Digital
		Theatre Systems, Inc.
		Connect a Digital Audio optical/coaxial cables from
	1 the Digital Audio Out jacks on the rear panel of the
		DVD Recorder & VCR to their corresponding
		Digital Audio Input jacks on your A/V Receiver:

To Digital Audio Input of an A/V

Receiver with a Dolby, MPEG2 or DTS

Digital Decoder

20 - English

Connecting an External Devices

❚Case1 : Connecting an external devices to the AUX jacks

You can connect other audio/video equipment to your DVD Recorder & VCR using audio/video cables if the appropri- ate outputs are available on the equipment chosen.

•You wish to copy a video cassette with the help of a second VCR.

•You wish to play back and/or copy pictures taken with a camcorder

•Make sure that both the external devices and the DVD Recorder & VCR are switched off before connecting the cables.

1	Connect one end of the video cable into the
	VIDEO input jack on the front of the DVD
	Recorder & VCR.
2	Plug the other end of the video cable into the
	appropriate output connector on the other

system (VCR or Camcorder, etc).

3 Connect one end of the audio cable supplied into the AUDIO input jacks on the front of the DVD Recorder & VCR.

• Take care to respect the colour coding of the up and down channels.

4 Plug the other end of the audio cable into the appropriate output connectors on the other system (VCR or Camcorder, etc).

❚Case 2 : Connecting a DV Device to the DV IN jack

If your DV Device has a DV output jack, connect it to the DV input jack of your DVD Recorder & VCR.

•If your camcorder has a DV output jack, see page 60 for more information.

■If the input is not selected automatically, use INPUT SEL. button to select proper

Note input.