Samsung MAXDN54RH/XEU Listening to a Cassette CD Synchro Record Feature, To listen to Press, Tape

Listening to a Cassette CD Synchro Record Feature

Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 40.

1	Switch the system on by pressing the On/Standby button.
2	Select the TAPE function by pressing TAPE on the front panel.
3	Open either cassette deck 1 or 2 by pushing and releasing the deck
	cover where PUSH EJECT (	) is written.

4 Insert the pre-recorded cassette with the open edge of the tape fac- ing downward.

5	Close the deck by pushing on it until it clicks into place.
	Result: Depending on the deck selected, the 1 or 2 indication is
	displayed in front of the counter number.
	If you insert a cassette in both decks, the system selects the
	deck in which you inserted the second cassette.
6	If you have inserted two cassettes, press Deck 1/2 on the front panel
	or directly the Deck 1/2 button on the remote control to select the
	cassette to be played.
	Result: Depending on the deck selected, the TAPE 1 or TAPE 2 indi-
	cation is displayed.
7
	To listen to...	Press ...
	Side A	TAPE (	)	DECK 1 and DECK 2
	Side B	TAPE (	)	DECK 2 only
	Result: The cassette starts playing.
8	When the cassette is stopped, select one of the following functions
	as required.
	To...			Press ...
	Rewind the cassette
	Fast-forward the cassette

On/Standby
	R
1Demo
	Timer		Timer
	On/Off		/Clock
					DOLBY DIGITAL
						2,7
	TUNER			DVD/CD			TAPE
	Band
	Mono/ST	Memory		CD Synchro	Display	Deck 1/2		REV. Mode
						6	TAPE	TAPE REC
		REC/Pause					Normal	HI-Speed	D
									S
									P
									/
									E
MIC Mixing	REC Lock		Echo	Down		Tuning Mode		Up	Q
MIC1	MIC2			8				8

You can record a compact disc on a cassette in two different ways:

Synchronised recording

Direct recording

This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.

1	Switch the system on by pressing On/Standby.
2	Insert a blank cassette in Deck 2.
3	Select the DVD/CD function by pressing DVD/CD on the front panel.
4	Load a compact disc.
5	Select the required disc.
6	Select the required track and press CD Synchro or press CD
	Synchro directly to start recording at the beginning of the disc.
	Result: REC is displayed and recording starts.
7
	To stop...	Press ...
	Recording and playing the compact disc

The function of CD Synchro is operated in only CD.

On/Standby
	R
1Demo
	Timer	Timer
	On/Off	/Clock
				DOLBY DIGITAL
					3
	TUNER		DVD/CD		TAPE
	Band
	Mono/ST	Memory	CD Synchro	Display	Deck 1/2	REV. Mode
			6		TAPE	TAPE REC
	REC/Pause				Normal	HI-Speed	SD
					7
							P
							/
							E
MIC Mixing	REC Lock						Q
		Echo	Down		Tuning Mode	Up	GB
MIC1	MIC2

33