Samsung DVD-VR300E/EUR manual Variable Search System, Go to 00000 stop, End search, Scan and play

Variable Search

System

Press the ANYKEY button to display the search screen in the stop mode. When a programme is recorded, the starting point is given an Index mark for easy location. However, the VHS Index Search System (VISS) cannot recognize index marks made by old VCRs. If the VCR has trouble finding a mark, it is proba- bly because the cassette was recorded on a VCR with- out VISS. If you want to index two programmes in a row, set your VCR to stop, then start recording each programme.

Go to [0:00:00] stop

Use this feature when you want to search for the [0:00:00] counter position on a cassete.

Press the CLEAR button at the point on the tape

1 where you want to set the counter to [0:00:00].

Go To [0:00:00]

OK

While a cassette is stopped, press the ANYKEY

2 button.

Select “Go To [0:00:00]”, and then press the OK

3 button.

End search

Use this feature when you want to search for a blank position to record a programme on a cassette.

While a cassette is stopped, press the ANYKEY

1 button.

2 Select “End Search”, and perss the OK button.

	The VCR will fast forward, searching for a
	blank position, and then automatically stop at
Note
	that position. If the VCR reaches the end of
	the tape during end search, the tape will be
	ejected.

Scan and play

Use scan and play when you don’t know exactly where a programme is located on a cassette tape.

-Forward Intro Scan

Highlight “Forward Intro Scan”, then press the OK but- ton.

-Reverse Intro Scan

Highlight “Reverse Intro Scan”, then press the OK but- ton.

Playback

Note

The VCR will rewind or fast forward, search- ing for the [0:00:00] counter position, and then automatically stop at that position.

English - 65