Quick Setup Guide
Step 
Getting Connected
Step 
Basic Operation
Step | Getting Connected |
Step | Select one of the following three types of connections: |
| Antenna + DVD Recorder + TV |
| Antenna + VCR/satellite receiver/cable box + DVD Recorder + TV |
| Antenna + DVD Recorder + external decoder box + TV |
This Recorder will only record on
The VHF/UHF RF OUT jack of this product sends only signals received through the antenna. It does not output audio/video signals. You must use one of the following connections on this unit.
Antenna + DVD Recorder + TV
You can connect your DVD Recorder to the television using the
SCART cable if the appropriate input is available on the television.
You thus:
● Obtain better quality sound and pictures
● Simplify the setting up procedure of your DVD Recorder
Connect the RF cable as shown.
Connect one end of the SCART cable to the AV1 socket on the rear
of the DVD Recorder.
Plug the other end into the appropriate connector on the television.
C Samsung Electronics |
|