Samsung DVD-R120/XET manual Setting the Clock, Check the date and time, Set the Auto Clock. See

System Setup

9 Check the date and time.

No Disc				Clock Set
Programme
Setup	Time	Date		Auto Clock
	12 : 00	01 / JAN /	2005	SAT On
MOVE	OK	RETURN		EXIT

•if it is : Correct, press OK button then the date and time will be saved. If you don't press the OK button, the date and time will be saved automatically after 5 seconds.

•if it is : Incorrect, input correct Time, Date, Year using †…œ

√buttons or number buttons. Press OK button then the date and time will be saved. When you need to change clock setting, you can set up it manually.

(see page 26)

■ Now, DVD Recorder is ready for use.

NOTE Function for “Plug & Auto Setup” is fixed already. So if you want to change this fixed one, you can change it by Presetting the Stations in OSD “Presetting Channels with the Manual set up function” menu.

(see page 28)

■Auto Set up function can be performed by pressing é (STOP) on the unit continuously for 5 seconds or more during power off with no disc inserted.

Setting the Clock

This menu is used to set the current time.

You need to set the time to use timer recording.

1 With the unit in Stop mode/No Disc mode, press the MENU button.

No Disc		Timer Record
Programme	ShowView		√
Setup	Timer Record		√
	ShowView Extended : Off		√
MOVE	OK	RETURN	EXIT

2 Press the …† buttons to select Setup, then press the OK or √ button.

No Disc			Setup
Programme	System		√
Setup	Clock Set		√
	Language
			√
	Audio		√
	Video		√
	Parental Control		√
	Install		√
MOVE	OK	RETURN	EXIT

3 Press the …† buttons to select Clock Set, then press the OK or √ button.

Use navigation …†œ √ buttons to input Time, Date or Year. Use number buttons to input clock data directly.

No Disc				Clock Set
Programme
Setup	Time	Date		Auto Clock
	12 : 00	01 / JAN /	2005	SAT Off
MOVE	OK	RETURN		EXIT

4 Press the …† buttons to select On for the Auto Clock.

No Disc				Clock Set
Programme
Setup	Time	Date		Auto Clock
	12 : 00	01 / JAN /	2005	SAT Off
MOVE	OK	RETURN		EXIT

5 Press the OK button, then the date and time will be saved.

If you don’t press the OK button, it will not be saved.

	■	You must have the RF cable connected to
		set the Auto Clock. See page 18
NOTE

■The DVD Recorder automatically sets the clock according to the time signal broadcast between the channels PR1 to PR5. If you do not need the Auto clock set function, select Off.

26- English