Samsung HT-X625T/EDC, HT-X625T/XET, HT-X625T/XEE manual 00 m 34 m 68 m 06 m 40 m 76 m

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.

Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Centre and Surround Speakers.

ENG

Setting Centre SPEAKER

If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance between	0.00 m	0.34 m	0.68 m	1.06 m	1.40 m	1.76 m
Df and Dc
Delay Time	0 ms	1 ms	2 ms	3 ms	4 ms	5 ms

Setting REAR SPEAKER

If the distance of Dc is equal to or longer than the distance of Dr in the figure, set the mode as 0ms.

Otherwise, change the setting according to the table.

Distance between	0.00 m	1.06 m	2.11 m	3.17 m	4.23 m	5.29 m
Df and Dc
Delay Time	0 ms	3 ms	6 ms	9 ms	12 ms	15 ms

Ideal CENTRE SPEAKER

placement

Ideal

SURROUND SPEAKER placement

It is desirable to place all speakers within this circle.

Df: The distance from FRONT SPEAKER

Dc: The distance from CENTRE SPEAKER

Ds: The distance from SURROUND SPEAKER

● system setup

M ` With PL II (Dolby Pro Logic II), the delay time may be different for each mode.

`With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.

`The Centre channel is only adjustable on 5.1 channel discs.

49