Samsung BD-P4600 manual Playing a Disc, Setting the Sound, Setting the Power On / Off Melody Sound

Playing a Disc

1.Push a disc into the DISC IN with the disc’s label facing up.

❖Using the touch keypad

•In normal operation mode (the touch keypad is bright), you can simply press a touch key once to instruct the Blu-ray Disc Player to perform the corresponding operation.

•If no manipulation or input is made for about 30 seconds after the Blu-ray Disc Player turns on, it switches to Dimmer mode.

•In Dimmer mode, you should press the same key twice to instruct the player to perform the corresponding operation. (If you press a touch key only once in Dimmer mode, the Blu-ray Disc Player does not perform the corresponding operation and just returns to normal mode.)

M	` When you stop disc play, the player remembers where you stopped, so when you press the PLAY button
	again, it will pick up where you left off. This is called the "Resume" function.
	With some BD discs(BD-J), this function may not work.
	` Press the STOP button twice during playback to disable the Resume function.
	` To pause the playback, press the PAUSE button during playback.
	To resume, press the PLAY button.

SETTING THE SOUND

Setting the Power On / Off Melody Sound

A Melody sound can be set so it is heard each time you turn the player on or off.

SN TIO UNFC ●SIAB

1.With the unit in Stop mode, press the MENU button. . Press the ENTER or ► button.

. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button.

. Press the ▲▼ buttons to select System, then press the ENTER or ► button.

. Press the ▲▼ buttons to select Power On/Off sound, then press the ENTER or ► button.

	Music			System Information
	Photo			Time Zone
				Clock Set
No disc	Setup	System	◄	Power On/Off sound	:	✓ On
		Language		Touch Key Sound	:
						Off
		Audio		BD Data Management
		Display		DivX(R) Registration
		HDMI		DivX(R) Deactivation
		Network		System Update

Parental

. Press the ▲▼ buttons to select On or Off, then press the ENTER or ► button. . Press the MENU button to exit the setup menu.

Setting the Touch Key Sound On / Off

You can set the player so a sound is heard each time a button is pressed on the top panel of the unit.

To setup, follow steps 1 through 4 above.

. Press the ▲▼ buttons to select Touch Key Sound, then press the ENTER or ► button.

. Press the ▲▼ buttons to select On or Off, then press the ENTER or ► button.

. Press the MENU button to exit the setup menu.

				Time Zone
	Music
	Photo			Clock Set
				Power On/Off sound	:	On
No disc	Setup	System	◄	Touch Key Sound	:		✓ On
		Language		BD Data Management			Off
		Audio		DivX(R) Registration
		Display		DivX(R) Deactivation
		HDMI		System Update
		Network
		Parental

English _35