Samsung BD-E5300/EN Automatic Network Setup, Manual Network Setup, Network Test, Network Status

Network

Please contact your ISP to find out if your IP address is static or dynamic. If it is dynamic - and most are - we recommend using the Auto procedure for network setup. This is easiest and will work in the majority of cases. If it is static, you must use the manual set up procedure.

Network setup directions start below.

✎NOTE

▪▪ This unit can only be connected to a Network via a wired connection.

Automatic Network Setup

111 In the Home menu, press the ◄► buttons to select Settings, and then press the ENTER button.

222 Press the ▲▼ buttons to select Network, and then press the ENTER button.

333 Press the ▲▼ buttons to select Wired Network Settings, and then press the ENTER button. The Wired Network Settings screen appears.

Settings

Display		Wired Network Settings
Audio	Internet Protocol Setup		: Auto				\
Network		IP Address	:	0	0	0	0
System		Subnet Mask	:	0	0	0	0
			:	0	0	0	0
Language Gateway
SecurityDNS			: Auto		0	0	0
General		DNS Server	:	0
Support		>Move		"Select		'Return

444 In the Internet Protocol Setup field, select Auto if it is not selected. (Press ENTER select AUTO, and then press ENTER.)

555 The Auto Function acquires and fills in the values for IP Address, Subnet Mask, etc., automatically.

✎NOTE

▪▪ This process can take up to five minutes.

666 After the Network Function has acquired the network values, press the RETURN button.

777 Select Network Test, and then press ENTER to ensure the player has connected to your network.

888 When the Network Test is complete, press the RETURN twice to return to the Main Menu.

999 If the Network Function does not acquire the network values, go to the directions for Manual Setup.

Manual Network Setup

Before you start manual network setup, you need the network setting values.

To get the Network setting values through most Windows computers, follow these steps:

■Windows XP

111 Right click the Network icon on the bottom right of the Windows desktop.

222 In the pop-up menu, click Status.

333 On the dialog that appears, click the Support tab.

444 On the Support tab, click the Details button. The Network settings are displayed.

■Windows 7

111 Click the Network icon on the bottom right of the Windows desktop.

222 In the pop-up menu, click Network and Sharing Center.

333 On the dialog that appears, click the Local Area Connection or Wireless Network Connection depending on your network connection.

444 On the Support tab, click the Details button. The Network settings are displayed.

To enter the Network Settings into your player, follow these steps:

111 In the Home menu, press the ◄► buttons to select Settings, and then press the ENTER button.

222 Press the ▲▼ buttons to select Network, and then press the ENTER button.

333 Press the ▲▼ buttons to select Wired Network Settings, and then press the ENTER button. The Wired Network Settings screen appears.

444 Select the Internet Protocol Setup field,

and then press the ENTER button.

555 Press the ▲▼ buttons to select Manual, and then press the ENTER button.

666 Press the ▼ button to go to the first entry field (IP Address).

777Use the number buttons on your remote to enter numbers.

888 When done with each field, use the ► button to move to the next field. You can also use the other arrow buttons to move up, down, and back.

999 Enter the IP Address, Subnet Mask,

and Gateway values in the same way.

1111 Press the ▼ button to go to DNS.

1111 Press the ▼ button to go to the first DNS entry field.

1111 Enter the numbers as above.

1111 Press the Return button on your remote.

1111 Run a Network Test to ensure the player has connected to your network.

Network Test

Use this menu item to connect to the wired network or check whether your network connection is working or not.

Network Status

Use to check whether a connection to the network and the Internet have been established.

BD-LIVE Internet Connection

Set to allow or prohibit an Internet connection when you use the BD-LIVE service.

•• Allow (All) : The Internet connection is allowed for all BD-LIVE contents.

•• Allow (Valid Only) : The Internet connection is allowed only for BD-LIVE contents containing a valid certificate.

•• Prohibit : No Internet connection is allowed

for any BD-LIVE content.

✎NOTE

▪▪ What is a valid certificate?

When the player uses BD-LIVE to send the disc data and a request to the server to certify the disc, the server uses the transmitted data to check if the disc is valid and sends the certificate back to the player.

▪▪ The Internet connection may be restricted while you are using BD-LIVE contents.

16