Samsung HT-H4550R/XU, HT-H4550R/EN, HT-H4500R/EN manual Networks and the Internet, Automatic, Manual

Settings

	Prevents playback of Blu-ray Discs
BD Parental	with a rating equal to or above a
Rating	specific age ratings unless the PIN
	is entered.
DVD Parental	Prevents playback of DVDs with a
	rating above a specific numerical
Rating
	ratings unless the PIN is entered.
Change PIN	Change the 4-digit PIN used to
	access security functions.
	General
Time Zone	You can specify the time zone
	that is applicable to your area.
	Support
	For more information about the
Software	Software Upgrade function, see
Upgrade	"Upgrading Software" on page
	21.
Contact	Provides contact information for
Samsung	assistance with your product.
Terms of	View the general disclaimer
Service	regarding third party contents
Agreement	and services.
	All settings will revert to the
Reset	default except for the network
	settings. The default security
	password is 0000.

Networks and the Internet

When you connect this product to a network, you can use network based applications and functions such as BD-LIVE and upgrade the product's software through the network connection.

Configuring Your Network Connection

Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, we recommend you use the Automatic procedure below. If it is static, you must use the Manual procedure that follows.

•Before you begin, confirm that the product is connected to your router with a network cable.

❑Automatic

To start the configuration process, follow these steps:

1.In the Home menu, select Settings, and then press the E button.

2.Select Network, and then press the E button.

3.Select Wired Network Settings, and then press the E button.

The Wired Network Settings screen appears.

4.Press the ► button on the Internet Protocol Setup menu.

Use ▲▼ button to select Auto, and then press the E button.

Settings

Display		Wired Network Settings
	Internet Protocol Setup						:
Audio
	Auto
Network IP Address			:
				0	0	0	0
System
		Subnet Mask	:	0	0	0	0
Language
		Gateway	:	0	0	0	0
Security
	DNS		: Auto
General
Support DNS Server			:	0	0	0	0

> Move " Select 'Return

5.The Network function acquires and fills in the values for IP Address, Subnet Mask, etc., automatically.

6.After the Network function has acquired the network values, press the RETURN (') button.

7.Select Network Test, and then press E. The home cinema validates the network connection. When it is done, press the RETURN (') button.

❑Manual

If you have a static IP address or the Automatic procedure does not work, you’ll need to set the Network Settings values manually.

Settings

Display		Wired Network Settings
	Internet Protocol Setup						:
Audio
	Manual
Network IP Address			:
				0	0	0	0
System
		Subnet Mask	:	255	255	255	0
Language
		Gateway	:	0	0	0	0
Security
	DNS		: Manual
General
Support DNS Server			:	0	0	0	0

> Move " Select 'Return

8.Follow the first four steps in the Automatic procedure, but select Manual instead of Auto in Step 4.

9.Press the ▼ button to go to the first entry field (IP Address).

10.Use the number buttons on your remote to enter numbers.

20 English