Samsung HT-H4500R/XN, HT-H4500R/EN, HT-H4500R/ZF, HT-H4500R/XU, HT-H4500R/XE manual Listening to Radio

Information	Shows the picture information including
	the name and size, etc.

NOTES

\\ Depending on the disc or storage device, the Tools menu may differ. All options may not be displayed.

\\ To enable the background music function, the photo file must be in the same storage media as the music file. However, the sound quality can be affected by the bit rate of the MP3 file, the size of the photo, and the encoding method.

Creating a Photo Playlist

You can create a playlist of photos in a way that is nearly identical to the way you create a playlist of music files. For instructions, see "Creating a Music Playlist" on page 26.

Listening to Radio

Using Buttons on the Remote Control

1.Press the FUNCTION button to select FM.

2.Tune in to the desired station.

•Preset Tuning 1 : Press the 5 button to select PRESET and then press the TUNING UP, DOWN button to select the preset station.

-- Before you can tune to preset stations, you must add preset stations to the product's memory. See Presetting Stations below.

•Manual Tuning : Press the 5 button to select MANUAL and then press the TUNING UP, DOWN button to tune in to a lower or higher frequency.

•Automatic Tuning : Press the 5 button to select MANUAL and then press and hold the TUNING UP, DOWN button to automatically search the band.

Setting Mono/Stereo

Press the MO/ST button.

•Each time the button is pressed, the sound switches between STEREO and MONO.

•In a poor reception area, select MONO for a clear, interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 into memory.

1. Press the FUNCTION button to select FM.

2. Press the TUNING UP, DOWN button to select

<89.10>.

3. Press the TUNER MEMORY button.

• NUMBER flashes on the display.

4. Press the TUNER MEMORY button again.

• Press the TUNER MEMORY button before NUMBER disappears from the display on its own.

• After you press the TUNER MEMORY button, NUMBER disappears from the display and the station is stored in memory.

5.To preset another station, repeat steps 2 to 4.

•To tune in to a preset station, press the TUNING UP, DOWN button.

About RDS Broadcasting

Using the RDS (Radio Data System) to receive FM stations

RDS allows FM stations to send an additional signal along with their regular program signals.

For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.

When tuned to an FM station which provides the RDS service, the RDS indicator lights up on the display.

Description on RDS function

•PTY (Program Type) : Displays the type of program currently being broadcast.

•PS NAME (Program Service Name) : Indicates the name of broadcasting station and is composed of 8 characters.

•RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed of maximum 64 characters.

•CT (Clock Time) : Decodes the real time clock from the FM frequency. Some stations may not transmit PTY, RT or CT information therefore this may not be displayed in all cases.

•TA (Traffic Announcement) : TA ON/OFF it shows that the traffic announcement is in progress.

NOTES

\\ RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak.

To show the RDS signals

You can see the RDS signals the station sends on the display.

Press the RDS DISPLAY button while listening to an FM station.

•Each time you press the button, the display change to show you the following information : PS NAME ; RT; CT ; Frequency

PS	While searching, <PS NAME>
	appears and then the station names
(Program	will be displayed. <NO PS> appears
Service)	if no signal is sent.
RT	While searching, <RT> appears
	and then text messages the station
(RadioText)	sends will be displayed. <NO RT>
	appears if no signal is sent.
Frequency	Station frequency (non-RDS service)

English 27

05 Media Play