04 Initial Setup
The initial setup dialogue box appears when the TV is first activated. Follow the 
> 
Settings > General > Start Setup menu.
•• If you connect any device to HDMI1 before starting the installation, the Channel Source will be changed to Set- top box automatically.
•• If you do not want to select
Using the TV Controller
You can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control Menu. The Control menu appears when the TV Controller is pressed while the TV is On. For more information about its usage, refer to the figure below.
Control menu |
|
|
|
| ||
: Power off |
|
|
|
| : Volume Up | |
|
|
|
| |||
: Channel Up |
|
|
|
| : Volume Down | |
|
|
|
| |||
: Channel Down |
|
|
|
| : Source | |
|
|
|
| |||
TV Controller / Remote control sensor
Press: Move
Press & Hold: Select
The TV Controller is placed at the bottom of the TV.
English
English - 13