Samsung HW-M360/EN manual Using the Remote Control, How to Use the Remote Control

08 Using the Remote Control

How to Use the Remote Control









	Surround	BluetoothPOWER	
		SOUND
		MODE




VOL WOOFER

Turns the Soundbar on and off.

Power

You can select from TREBLE, BASS, or AUDIO

	SYNC.
	•• To control the volume of the treble or bass
Sound Control	sound, select TREBLE or BASS in Sound
	Settings, and then adjust the volume
	between -6~+6 by using the Up/Down
	buttons.
	•• If the video and audio between the TV and
	your Soundbar are not synchronized, select
	AUDIO SYNC in Sound Settings, and then
	set audio delay between 0~300 milliseconds
	by using the Up/Down buttons.
	(Except “USB” mode)
	•• Audio Sync is only supported in some
	functions.

The Surround Sound function adds depth and a

SOUNDBAR



Surround	sense of space to sound.
Surround	Each time you press this button, ON and OFF
	alternate.
	•• ON : Play sound over all the speakers.
	•• OFF : You can hear the sound of the original
	source channel from several speakers.

	SOUND	You can select the desired sound effect by choosing STANDARD, MUSIC, CLEAR VOICE,
	MODE	SPORTS, or MOVIE.
	SOUND MODE	•• DRC (Dynamic Range Control)
		Lets you apply dynamic range control to Dolby Digital tracks. If you press and hold the
		SOUND MODE button while in standby mode, DRC (Dynamic Range Control) turns on
		or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.)

Press to select a source connected to the Soundbar.

	•• BT PAIRING mode
Source	To turn on “BT PAIRING” mode in “BT” mode, press and hold the	(Source) button
	for more than 5 seconds. See page 12 for details.

ENG - 13