Samsung HT-TZ315R/NWT, HT-TZ212R/EDC Setting the Delay Time, Setting up the Speaker Delay Time

system setup

Setting the Delay Time

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers.

1.In Stop mode, press the MENU button.

. Press the Cursor % button to move to Audio and then press the ENTER button.

. Press the Cursor % button to move to DELAY TIME and then press the ENTER button.

4.Press the Cursor ,,, button to move to the desired speaker and then press the ENTER button.

5.Press the Cursor , to set the Delay time.

~You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and 15mSEC.

dPress the RETURN button to return to the previous level.

dPress the EXIT button to exit the setup screen.

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.

Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center and Rear Speakers.

`With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.

`The Center channel is only adjustable on 5.1 channel discs.

56