Samsung BQ1D4T081/XEO manual Rapid drying, Catalytic enamel surface Optional, Hand cleaning

Page 18

Rapid drying

1.Leave the oven door ajar at approximately 30 °.

2.Set the operation knob to single mode.

3.Press the function button.

4.Select convection with the selector knob.

5.Set a cooking time of about 5 minutes and a temperature of 50 °C.

6.Switch the oven off at the end of this period.

Catalytic enamel surface (Optional)

The removable cover casing is coated with a dark gray catalytic enamel this can become coated with oil and fat distributed by circulating air during convection heating. These deposits will burn off at oven temperatures of 200 °C and higher, for example, while baking or roasting. Higher temperatures will result in faster burning.

1.Remove all accessories from the oven.

2.Clean all interior oven surfaces as described in the hand cleaning section.

3.Set the oven to upper- and lower heat.

4.Set the heat to 250 °C.

5.Run the oven for approximately 1 hour. The length of time depends on the degree of soiling. Any remaining soil will gradually disappear with each subsequent use of the oven at high temperatures.

Hand cleaning

CAUTION: MAKE SURE THE OVEN AND ACCESSORY IS COOL BEFORE CLEANING

Oven Interior

For cleaning the interior of the oven, use a clean cloth and a mild cleaning agent or warm soapy water.

Do not hand-clean the door seal.

Do not use scouring pads or cleaning sponges.

To avoid damaging the enameled oven surfaces, use customary oven cleaners.

To remove stubborn soil, use a special oven cleaner.

Do not use abrasive cleaning agents, hard brushes, scouring pads or cloths, steel wool, knives or other abrasive materials.

Oven exterior

For cleaning the exterior of the oven, use a clean cloth and a mild cleaning agent or warm soapy water.

Dry with kitchen roll or a dry towel.

Do not use scourers, caustic cleaners or abrasive products.

Stainless steel oven fronts

Do not use steel wool, scouring pads or other abrasives. They may damage the finish.

Aluminum oven fronts

Wipe the surface gently with a soft clean cloth or micro fiber cloth and a mild window cleaning detergent.

Accessory

Wash the accessory after every use and dry it with a kitchen towel. If necessary, lay in warm soapy water for about 30 minutes for easier cleaning.

18_cleaning & care

BQ1D4T081_XEO_00069Y-EN.indd 18

2011-03-22 ￿￿ 6:50:19

Image 18
Contents Built-in Oven Using this manual Safety instructionsElectrical safety Disposing of the packaging material Safety during operationDisposal instructions Disposing of old appliancesAccessory Oven controlsGrill spit Optional Dripping trayBaking tray Rotisserie spit and Shasilik OptionalTest dishes FunctionsSingle mode Single ModePress Temperature key Twin cookingSet end time SettingsSet cooking time Optional ADD Cooking TimeChange times set Change temperatureTime setting Turn Selector knobTone signal Set alarmDeactive alarm Switch offFood Item Weight/kg Accessory Shelf Recommendation Level Automatic cookingSingle oven auto cook programmes Automatic cooking13 Technical specifications Installation & maintenanceInstallation Power connectionInitial cleaning Initial setupTroubleshooting Problem SolutionCode Problem Solution Information codesCleaning & care Steam cleaning OptionalSteam cleaning notes Hand cleaning Rapid dryingCatalytic enamel surface Optional Door removal Door glass removalSide runners optional Detaching the side runnersBulb exchange Rear oven lampOven side light Optional Memo Memo Code No. DG68-00069Y
Related manuals
Manual 24 pages 830 b Manual 24 pages 6.02 Kb Manual 24 pages 32.29 Kb Manual 1 pages 26.59 Kb