Samsung RS61781GDSR/EO manual Making Minor Adjustments to the Doors

When the Freezer door is lower than the fridge

Insert a fl at-blade screwdriver into a slot on the Leg, turn it clockwise or counter clockwise to level the freezer.

When the Freezer door is higher than the fridge

Insert a fl at-blade screwdriver into a slot on the Leg, turn it clockwise or counter clockwise to level the fridge.

Leg Screw Driver

Leg

Screw Driver

Refer to the next section for the best way to make very minor adjustments to the doors.

MAKING MINOR ADJUSTMENTS TO THE DOORS

Remember, a levelling refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on levelling the refrigerator.

When the door of the freezer is higher than the fridge

Adjustment part	01
	SETTING
In the case of the process to correct the imbalance	UP
is the same. Open the doors and adjust them, one
at a time, as follows:

1.Unscrew the nut 1 from the lower hinge until it reaches the upper end of the bolt 2 .

3	Wrench
2	Bolt
1	Nut

When you release the nut 1 , make sure that you use the Allen wrench provided 3 to loosen the bolt 2 in a counter-clockwise direction. You should then be able to unscrew the nut 1 with your fi ngers.

2. Adjust the height difference between the doors by

turning the bolt 2 clockwise or counter

clockwise .

When you turn clockwise , the door will move up.

3. After adjusting the doors, turn the nut 1

clockwise until it reaches the lower end of the bolt, then tighten the bolt again with the wrench 3 to fix the nut in place 1 .

If you do not secure the nut fi rmly, the bolt may release.

setting up _15

DA99-04031D-11.indb 15 2015. 12. 15. ￿￿ 2:21