CLEANING THE ACCESSORIES
Deodorizer (optional)
•Remove the cover with a flat blade screw driver as shown.
•Take out the cartridge from the cover and soak it in clean, warm water for at least 4 hrs. Completely dry out the cartridge with sunlight for at least 8 hrs in an open area.
•Repeat this process once or twice a year.
With CoolSelect zoneTM Model
Without CoolSelect zoneTM Model
| • If it is dried in a confined area, odor may be spread to that area. |
NOTE | • Keep the children away from yellow water, they may drink water. |
CHANGING THE INTERIOR LIGHT
Before changing the interior light, unplug the appliance from the power supply. If you experi- ence difficulty when changing the light, contact your service centre.
WARNING
INTERIOR LIGHT IN THE FREEZER (BASIC MODEL ONLY) / REFRIGERATOR
|
| Place a flat screwdriver under |
| Pull the cover in the direction of |
| After changing the bulb, | ||||||
|
| the light cover hooks and |
| the arrow. |
| replace the light cover. | ||||||
|
| push in the direction of the |
|
|
|
|
|
|
|
|
|
|
|
| arrow. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
INTERIOR LIGHT IN THE FREEZER (MODEL WITH ICE AND WATER DISPENSER)
Lift and pull out the ice maker cover (➀). | ➀ |
|
Use a screwdriver to remove the light cover (➁).
Replace the bulb with a new one (➂), and then secure the light cover back into place using a screwdriver.
Replace the ice maker cover.
➁
➁ 
➂
18