Selecting Mode
mode helps users to fall asleep well after going to bed whether
being too hot to sleep or being awakened by coldness. The mode can be selected only when the air conditioner is switched on or off in cool/heat mode.
1 Press the | (On/Off) button. |
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2 Press the | button to select cool or heat mode. |
|
Result: | The indoor unit beeps each time you press the | button. |
| The air conditioner runs in cool or heat mode. |
|
3Press the button.
Result: The timer indicator is displayed.
The Off timer is blinking on the remote control.
4 To set the Off timer, press the buttons once or more times until the required Off time is displayed.
Result: The mode will be automatically stopped in
8 hours if the operation time is not set.
You can set the Off timer by pressing the buttons to
turn off the mode automatically at the appointed time within a range of 30 minutes to 12 hours.
Each time the buttons are pressed, the time is
increased by 30 minutes or 1 hour. mode will be stopped at the appointed off time.
5 Press the | button. |
|
|
|
|
Result: | The remaining time is displayed. |
|
| ||
Note | In the case of selecting | mode or adjusting the extra | |||
| time for | mode, you should press the | button | ||
| within 10 seconds. If you do not press the | button within | |||
| 10 seconds, |
| mode will be canceled automatically. |
6Press the button to adjust the temperature until the desired temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result: Each time you press the button;
-The temperature adjusts by 1°C
-The indoor unit beeps