Samsung LS17GSEKS/EDC manual Self-Test Feature Check

Page 42

Check the following items if there is trouble with the monitor.

1.Check if the power cord and the video cables are properly connected to the computer.

2.Check if the computer beeps more than 3 times when booting.

(If it does, request an after-service for the main board of the computer.)

3.If you installed a new video card or if you assembled the PC, check if the installed the adapter(video) driver and the monitor driver.

4.Check if the scanning ratio of the video screen is set at 56Hz ~ 75Hz. (Do not exceed 75Hz when using the maximum resolution.)

5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel→System→Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

If problems repeatedly occur, contact an authorized service center.

Q & A

Question

How can I change the frequency?

How can I adjust the resolution?

How can I set the Power Saving function?

How can I clean the outer case/LCD Panel?

Answer

Frequency can be changed by reconfiguring the video card.

Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)

Windows ME/XP/2000 : Set the resolution at the Control Panel→Display→Settings.

* Contact the video card manufacturer for details.

Windows ME/XP/2000 : Set the function at BIOS-SETUP of the computer or the screen saver. (Refer to Windows/Computer Manual).

Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water.

Do not leave any remains of the detergent nor scratch the case. Do not allow any water to go inside the monitor.

Self-Test Feature Check

Self-Test Feature Check Warning Messages Environment Useful Tips

Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly.

Self-Test Feature Check

1.Turn off both your computer and the monitor.

2.Unplug the video cable from the back of the computer.

3.Turn on the monitor.

If the monitor is functioning properly, you will see a box in the illustration below.

This box appears during normal operation if the video cable becomes disconnected or damaged.

Page 41 Page 43
Image 42
Page 41 Page 43
Contents SyncMaster 720NA Power Do not use a damaged or loose plugDo not drop the monitor when moving it InstallationInsert the power plug firmly so that it does not come loose Use only a properly grounded plug and receptacleSet down the monitor carefully Keep any heating devices away from the power cableDo not place the product on the floor Do not place the monitor face downClean Do not spray water or detergent directly on the monitorOther Do not remove cover or backDo not cover the vents on the monitor cabinet Never insert anything metallic into the monitor openingsFalling product could cause physical damage even death Unpacking Quick Setup GuideCable Sub Cable Power Cord Monitor Bottom ManualFront Rear Sub 15-pin portMonitor Assembly Attaching a base Windows XP/2000 Click Windows XP/2000 DriverMicrosoft Windows XP Operating System Page Page How to install Click Start , Setting , Control Panel Microsoft Windows NT Operating SystemLinux Operating System How to install the Natural Color software Natural ColorNatural Color Software Program Auto MagicBright AutoBrightness PictureBrightness Contrast ColorImage Color Tone Color ControlOSD FineLanguage Position Transparency Display Time SetupInformation Select to turn the anion On or OffShows a video source, display mode on the OSD screen What is MagicTune? OSD ModeBasic Functionality Installation Page Installationation Problems Hardware OSD Mode Button Tab DefinitionPicture Tab Definition Color Tab DefinitionImage Tab Definition Color ToneImage Setup Option Tab DefinitionSupport Tab Definition PreferencesColor Calibration PreviewPage Uninstall Troubleshooting Can you see Check Signal Mode,Recommanded Mode 1280 x 1024 60Hz on the screen?Refer to the Preset Timing Modes Panel → Display → SettingsSelf-Test Feature Check Useful Tips General LCD PanelPowerSaver Preset Timing ModesHorizontal Frequency Service Australia BrazilGermany Portugal United KingdomTerms For Better DisplayAuthority FCC Information User Instructions User InformationIC Compliance Notice European NoticeEurope Only Why do we have environmentally-labelled monitors?MPR II Compliance PCT NoticeLead What does labelling involve?Environmental Requirements CadmiumWhy do we have environmentally labelled computers? CFCs freonsTCO Development Environmental requirements Flame retardants ErgonomicsEcology EnergyEmissions TCO03 Recycling Information TCO03 applied model onlyVideo In / RS 232 / Video Out Transport and Storage LimitationsWhat is Image retention ? Power Off, Screen Saver, or Power Save ModeSuggestions for specific applications
Related manuals
Manual 61 pages 32.52 Kb Manual 62 pages 25.12 Kb Manual 61 pages 56.61 Kb Manual 61 pages 1.02 Kb Manual 63 pages 25.48 Kb

LS17GSEKS/EDC specifications

The Samsung LS17GSEKS/EDC monitor is a compelling option for both casual users and professionals seeking reliable display technology. This 17-inch monitor is part of Samsung's extensive catalog, showcasing their commitment to innovative design and cutting-edge features. With an elegant form factor, the LS17GSEKS/EDC is engineered to fit seamlessly into any workspace, be it at home or in an office environment.

One of the standout characteristics of this model is its high-quality display. The LS17GSEKS/EDC features a Samsung PLS panel that offers excellent color accuracy and wide viewing angles. With a resolution of 1280 x 1024 pixels, it delivers crisp images and vibrant colors, making it ideal for graphic design, office work, or entertainment.

The monitor includes advanced technologies such as Flicker-Free and Eye Saver Mode, which significantly reduce eye strain during prolonged use. Flicker-Free technology eliminates screen flicker, giving users a more stable and comfortable viewing experience. Eye Saver Mode, on the other hand, reduces blue light emissions, providing a more soothing display that protects your eyes from fatigue.

In terms of connectivity, the LS17GSEKS/EDC is equipped with multiple input options, including VGA and DVI ports, making it versatile enough to connect with various devices, such as computers, laptops, and even gaming consoles. This flexibility ensures that users can easily integrate the monitor into their existing setups.

The monitor’s ergonomic design also contributes to a more comfortable viewing experience. It features a tilt function that allows users to adjust the screen angle according to their preference. This adjustability promotes better posture and enhances productivity, particularly during prolonged use.

Additionally, the Samsung LS17GSEKS/EDC is backed by the company’s commitment to sustainability. The monitor is Energy Star certified, ensuring that it operates efficiently and consumes less power without compromising performance. This energy-efficient design not only benefits the environment but also helps users save on electricity bills.

In summary, the Samsung LS17GSEKS/EDC monitor combines excellent display quality, user-friendly features, and sustainable design. With its impressive specifications and thoughtful technology integrations, it's an ideal choice for anyone looking to enhance their computing experience. Whether for work, study, or entertainment, this monitor stands out as a reliable and stylish solution.
Top Page Image Contents