Samsung HMX-E10WN/XAA manual Using with a Windows computer, Using the Intelli-studio Program

using with a Windows computer

USING THE Intelli-studio PROGRAM

Using the Intelli-studio program built into your camcorder, you can transfer video and photo files to your PC and edit them on your PC screen. Intelli-studio offers the most convenient way for you to manage your video and photo files.

Step 1. Connecting the USB plug

1.Set “PC Software: On.”¬page 61

•This is the default setting.

2.Connect the built-in USB plug of the camcorder to the USB port of the PC.

•A new file saving window appears along with the Intelli-studio main window.

•Depending on your version of Windows, the removable disk window also appears.

3.Click “Yes” in the file saving window. The uploading procedure starts. Click “Yes” to confirm.

•If you do not want to save new files, select “No.”

Settings

Auto Power Off

PC Software

Format

Default Set

To disconnect the USB plug

To disconnect the USB plug after completing the file transfer, you must follow these steps:

1.	Click the “Safely Remove Hardware icon	” on the taskbar.
2.	Select “USB Mass Storage Device,” and then click “Stop.”
3.	If the “Stop a Hardware device” window appears, click “OK.”
4.	Disconnect the camcorder’s built-in USB plug from the PC.

• Make sure you insert the USB plug into the USB port with the plug facing in the correct direction.

• When the built-in USB plug is connected, turning the camcorder on or off may cause the PC to malfunction.

• If you disconnect the camcorder’s built-in USB plug from the PC while transferring files, the data transmission will stop and the data may be damaged.

• If you connect the built-in USB plug to a PC via a USB HUB or simultaneously connect the built- in USB plug along with other USB devices, the camcorder may not work properly. If this occurs,

		remove all USB devices from the PC, and then reconnect the camcorder.
	• Intelli-studio may not automatically run. If this occurs, access My Computer or Windows Explorer,
66	•	open the drive that corresponds to your camcorder, find Intelli-studio, and then run IStudio.exe.
		The camcorder is turned off when its USB plug is departed from the USB port of the computer.