Prior Intrusion Alert

OPERATION

SHOCK / IMPACT PROTECTION WITH PRE-WARNING

Once the system is armed, if a low-level shock to the vehicle body is detected, the pre-warning sensor activates with 5 siren chirps and one light flash as a Warn-Away feature. If a hard impact to the vehicle is detected the system will go into a full trigger cycle for 20 seconds. Adjust the shock sensor as needed by turning the control knob clockwise or counter-clockwise to increase or decrease the sensitivity. Shock sensors will “settle in” over time and it may take a few tries over a few weeks to get the adjustment correct for your vehicle. We recommend a moderate adjustment where the vehicle is protected but it is not constantly triggering from the slightest vibration therefore creating a nuisance.

ARMING WITHOUT SHOCK SENSOR

To arm the alarm without Shock sensor protection, press Button #1 as normal then press and hold Button #4 (SLNT) for about 3 seconds until the unit flashes the lights 3 times indicating shock sensor bypass.

EMERGENCY OVERRIDE/DISARM

If you have lost the transmitter or it stops working for any reason and the Alarm is armed, you will have to open the door with the key, (activating the alarm), turn the ignition ON, press and hold the override/program until the system disarms (about 7 seconds). The Alarm will disarm allowing you to operate the vehicle until you can repair/replace the remote transmitter.

VALET MODE (VIA KEY or REMOTE)

Turn the ignition on and press and hold the program button for 5 seconds the remote until lights chirps 3 times. The in-dash LED turns on solid. Repeat the procedure to exit VALET mode. To activate Valet using the remote control, press both the #1 (Lock) 7 #2 (Unlock) buttons together for 3 seconds when the system is disarmed. The system will chirp 3 times and the LED will turn off on Valet mode exit. Lock/Unlock and AUX features will still operate in when in VALET mode.

VALET PARK Mode (Using the remote transmitter only)

Note: Valet Park mode is only accessible when using the remote transmitter. Valet park mode allows you to turn over the vehicle to a valet allowing access to drive/lock/unlock your vehicle, but alarm will trigger if the trunk is opened. To activate Valet Park, press and hold both buttons #1 (Lock) and Button #2 (unlock) together for about 6 seconds. 3 chirps will be heard first when unit goes into regular Valet and as you continue to hold both buttons you will hear 2 more chirps. LED will flash slowly when in Valet Park. Repeat this step to exit Valet Park mode.

If the system was tripped in your absence, the dash LED will be flashing rapidly. When the system is disarmed you will hear 2 chirps, a pause then 4 chirps. Carefully inspect your vehicle for any damage or theft.

CS-2004TW1, CS-2004DC specifications

Crimestopper Security Products has built a reputation for offering high-quality security systems that cater to various needs in vehicle security. Among its lineup, the Crimestopper CS-2004DC and CS-2004TW1 models stand out with a range of advanced features that enhance vehicle protection and convenience.

The Crimestopper CS-2004DC is a comprehensive security and keyless entry system that integrates several impressive functions, designed to provide maximum security for your vehicle. One of its main features is the two-way remote control communication, which allows the user to receive feedback from the vehicle when commands are sent. This is particularly useful for ensuring that commands like locking or unlocking the doors have been executed correctly. The system also includes a built-in LED status indicator and an audible confirmation signal, further enhancing user awareness.

On the other hand, the CS-2004TW1 model features a similar set of advanced functions with the addition of a sleek design and enhanced range. Like the CS-2004DC, the CS-2004TW1 includes two-way communication, but it also features a more robust transmitter with extended range capabilities, providing convenience even at greater distances from the vehicle. This model offers a 4-button remote, making it easy to control a variety of functions such as trunk release, panic mode, and remote start.

Both models utilize Crimestopper's advanced technology, which includes a virtual alarm system equipped with adjustable sensitivity settings. This technology allows the user to tailor the system to their specific environment, reducing false alarms triggered by environmental factors such as wind or passing vehicles. Furthermore, the inclusion of an onboard shock sensor enhances the systems' responsiveness to unauthorized entry attempts.

Additionally, the Crimestopper CS-2004 series is designed for easy installation. Most of the features can be integrated into newer vehicle models without extensive modifications. This ease of installation, coupled with the system's reliability, makes it a compelling choice for vehicle owners concerned about security.

In summary, the Crimestopper CS-2004DC and CS-2004TW1 are exemplary vehicle security solutions, combining advanced technology with user-friendly design. Their two-way communication, adjustable sensitivity, and robust remote controls offer both security and convenience for vehicle owners, securing peace of mind in today’s world. Whether you are looking to bolster your vehicle's defenses or simply enjoy the added convenience of keyless entry, these models are designed to meet demanding security needs while providing reliable and efficient performance.