Mitsubishi Electronics WD-73640, WD-73CA1, WD-73C1 Receiver with Hdmi Output, Digital coaxiaJ

A/V Receiver

Required:

Digital coaxial audio cable

To send audio from TV channels received on the ANT

input or from devices connected directly to the TV, you must use this connection.

The TV makes all incoming audio available as an output in digital format on the DIGITAL AUDIO OUTPUT jack:

•Analog incoming audio is available as output in digital stereo format.

•Digital incoming audio is available as digital audio.

See page 9 for tips on using an external sound system.

Digital coaxiaJ

cable

Digital A/V receiver back

panel

Note: On rare occasions, the audio portion of an HDMI signal may be copy-restricted and can- not be output from the TV as a digital signal..

2. TV Connections 17

A/V Receiver with HDMI Output

Required: One HDMI cable

This option allows you to view and hear content from devices connected to an A/V receiver. The A/V receiver

can send audio and video to the TV over a single HDMI cable.

You can add an optional audio connection from the TV'saudio output. The optional audio connection allows you to hear, through the A/V receiver, devices connected to the TV only, e.g., an antenna on the ANT input.

See page 9 for tips on using an external sound system.

)IGITAL

AUD{O,

¥

123

TV

l

HDMI cable

A/V receiverwith	I
HDMI output
If your A/V receiver converts
all video signals for output
on HDMI, you can use any
connection types from
external devices (content
can be HD or SD video).

For assistance call 1(800) 332-2119