Installation Instructions | FSA1018 |
Steel Stud |
Drywall |
Plastic Cap |
Plastic Straps |
Anchor Metal Channel |
SIDE VIEW |
Figure 7
11.Place mount over anchors and align mounting holes in display mount with holes in anchors. (See Figure 8)
12.Place flat washer (K) onto button head capscrew (L).
13.Insert Phillips pan head capscrews (L) with flat washer (K) through mounting hole in display mount and into anchor (M) and tighten until flush against mount. DO NOT overtighten!
WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Overtightening of mounting hardware can damage the steel studs. DO NOT overtighten mounting hardware!
Steel Stud |
Drywall |
(K) x 3 |
(L) x 3 |
Display Mount |
Anchor Metal Channel |
SIDE VIEW |
Figure 8
7