Samsung SCC-521P manual Specifications, Wall or ceiling Main body Screw Driver

User Guide

4.Attach the camera on the target location with the screw driver using the provided tab screw.

Wall or ceiling

Main body

Screw Driver Tab screw

5.Set the proper image by moving the camera body (PCB board) inside the dome camera upward or downward and set the focus by turning the lens to the left or right direction.

Wall or ceiling

Adjust the	Adjust focus by
image upward
	turning left or right
or downward

6.Assemble the dome cover by turning it clockwise.

NOTE

Please make sure that any foreign matter gathers on the lens cover when assembling or disassembling the dome cover.

					User Guide
5. Specifications
		Item	Details
	Broadcasting		SCC-520/521 :NTSC
	system		STANDARD
						E
			SCC-520P/521P/523P:PAL
			STANDARD
	Pick-up device		1/3" SUPER HAD IT CCD
	Number of effective		SCC-520 : 510(H) x 492(V)
	pixel		SCC-521 : 768(H) x 494(V)
			SCC-520P : 500(H) x 582(V)
			SCC-521P/523P	: 752(H) x 582(V)
	Synchronization		Internal
	Resolution		SCC-520/520P : 33	0 TV Lines (H)
				350 TV Lines (V)
			SCC-521/521P/523P :
			480 TV Lines (H)
			350 TV Lines (V)
	Video output		VBS 1.0Vp-p(75	, composite)
	S/N ratio		More than 50dB
	Min. illumination		SCC-520(P) :	1Lux(F2.0, 50 IRE)
			SCC-521(P)/523P :
				2Lux(F2.0, 50 IRE)
	Lens (focal length)		SCC-520(P)/521(P) : f=3.8mm
			SCC-523p	: f=2.9mm
	Gamma correction		0.45
	In/out connector		Signal output: BNC, Power input :
			DC jack
	Operating		-10~+50°C
	temperature
	Power source		DC 12V
	Power consumption		2 W
	Size		100(ø) x 67(H)mm
	Weight		150g

8 9