Chief Manufacturing KSA-1009 Install Security Pivot Bolts, Install 4-inch Security Pivot Bolts

Installation Instructions FSA/KSA-1009

INSTALL SECURITY PIVOT BOLTS

Perform the applicable procedure to replace the regular pivot bolts with security pivot bolts. You will need the security hex keys (provided) to complete the installation.

Install 4-inch Security Pivot Bolts

For swing arm models, replace the standard pivot bolts with security pivot bolts, as follows:

NOTE: Do not remove the display (not shown) from the Centris mount.

1.Verify that you have the correct parts.

2.Remove the 4-inch pivot bolt from the Centris mount. Exercise care to retain the other parts shown in Figure 4.

3.Install the 4-inch security pivot bolt (10) at the Centris mount. Make sure the other parts are installed in place as shown in Figure 4.

4.Repeat Steps 2 and 3 to install the second

4-inch security pivot bolt (10) into the other end of the mount.

Install 5-inch Security Pivot Bolts

4” Security Pivot Bolts

Centris

Mount

Small

Washer

Pivot Pin

Large

Washer

Nut

Flat Washers

For lift arm models, replace the standard pivot bolts with security pivot bolts, as follows:

NOTE: Do not remove the display (not shown) from the Centris mount.

1. Verify that you have the correct parts.	Centris
	Mount

Figure 4. Install 4-inch Security Pivot Bolt

(Swing Arm Example)

5” Security Pivot Bolts

2.Remove the 5-inch pivot bolt from the Centris mount. Exercise care to retain the other parts shown in Figure 5.

3.Install the 5-inch security pivot bolt (20) at the Centris mount. Make sure the other parts are installed in place as shown in Figure 5.

4.Repeat Steps 2 and 3 to install the second

5-inch security pivot bolt (20) into the other end of the mount.

Install 4-inch and 5-inch Security Pivot Bolts

For models that have both 4-inch and 5-inch pivot bolts, do the following:

NOTE: Do not remove the display (not shown) from the Centris mount.

1.Verify that you have the correct parts.

2.Remove and replace the regular pivot bolt with the applicable security pivot bolt (see Figure 5).

Small

Washer

Pivot Pin

	Large	Flat
		Washers
	Washer
Nut		4” Security
		Pivot Bolt

Figure 5. Install 5-inch Security Pivot Bolt

(Lift Arm Example)

5