Desa RCP80V, TC80V Maintenance, Storage, Specifications, Flame Patterns, Keep heater clean

Page 5

OWNER’S MANUAL

OPERATION

Continued

FLAME PATTERNS

Figure 5 shows a correct flame pattern. The burner flame is mostly blue with a slight yellow coloring on the ends.

Figure 6 shows an incorrect flame pattern. The flame is mostly yellow. The incorrect flame pattern results from low gas pressure or from flashback.

CAUTION: Running heater below specified input rating may cause flashback. During flash- back, the burner flame is mostly yellow. The flame will burn inside the burner tube, causing a roar- ing noise. If flashback occurs,

Yellow

Flame

Blue

Flame

Flame Inside Burner Tube (makes roaring noise)

Figure 6 - Incorrect Flame Pattern during Flashback

MAINTENANCE

WARNING: Never attempt to service heater while it is con- nected to propane supply, oper- ating, or hot. Severe burns can occur.

1.Keep heater clean.

2.Inspect heater before each use. Check connections for leaks. Apply mixture of liquid soap and water to connections. Bubbles forming show a leak that must be corrected. Correct all leaks at once.

3.Inspect hose/regulator assembly before each use. If hose is highly worn or cut, replace.

4.Have heater inspected yearly by a quali- fied service person.

turn heater off. After burner tube cools, restart the heater.

Slight

Yellow

Coloring on Flame Ends

Blue

Flame

Burner

Tube

OFF

 

LO

HI

MED

 

Figure 5 - Correct Flame Pattern at High Position

STORAGE

CAUTION: Disconnect heater from propane supply tank(s).

1.Store propane tank(s) in safe manner. Refer to Chapter 5 of Standard for Stor- age and Handling of Liquefied Petroleum Gases, ANSI/NFPA 58 and/or CAN/CGA B149.2. Follow all local codes. Always store propane tanks outdoors.

2.Place plastic cover caps over brass fit- tings on inlet connector and hose/regu- lator assembly.

3.Store in a dry, clean, and safe place.

SPECIFICATIONS

Rating (Btu/Hr)

 

High

80,000

Low

40,000

Fuel

Propane Vapor Only

Fuel Consumption

 

Gallons/Hour

0.87 / 0.44

Pounds/Hour

3.71 / 1.86

Supply Pressure (To Regulator)

Maximum

200 psi

Minimum, for

 

input adjustment

20 psi

Manifold Pressure

(inches of water column)

High

18

Low

23.8

Ignitor Gap

0.195"

Weight (Pounds)

13

Shipping Weight

 

(Pounds)

17

Size - L x W x H

 

(Inches)

20 x 15 x 16

Minimum Temperature -20ºF (-29ºC) Surrounding Air Temperature

103385

5

Image 5
Contents General Hazard Warning Propane Construction HeaterFor indoor use only. Do not use heater outdoors Safety InformationUse only propane gas set up for vapor withdrawal Unpacking Product IdentificationPropane Supply Theory OperationTo Start Heater InstallationTo Stop Heater To Restart HeaterSpecifications MaintenanceKeep heater clean StorageCheck wire lead for damage. Re TroubleshootingTank and reopen slowly Place piezo ignitor and/or ignitor elecReplacement Parts AccessoriesParts Under Warranty Parts not Under WarrantyTC80V RCP80V Illustrated Parts BreakdownKEY Part Description QTY Parts ListWarranty and Repair Service

RCP80V, TC80V specifications

The Desa TC80V and RCP80V are cutting-edge technologies designed for industrial and commercial applications. These robust models are part of the highly regarded line of equipment from Desa, known for their reliability, efficiency, and innovative features.

The Desa TC80V is a premier heating unit that excels in both performance and energy efficiency. It integrates advanced combustion technologies, optimizing fuel usage and reducing emissions. Part of its appeal lies in its compact design, making it suitable for various spaces without compromising on heat output. The TC80V operates with a user-friendly digital control panel that allows operators to set precise temperatures and monitor performance in real-time, ensuring that environments remain comfortable and conducive to productivity.

On the other hand, the Desa RCP80V is a high-performance cooling system that offers exceptional versatility. It utilizes a state-of-the-art refrigeration cycle that promotes maximum cooling efficiency while minimizing energy consumption. The RCP80V features a variable speed compressor that adjusts the cooling output based on the ambient conditions. This adaptability not only enhances comfort but also lowers operational costs, making it an economical choice for businesses seeking reliable climate control solutions.

Both models boast impressive durability and build quality, designed to withstand harsh operating conditions. They are equipped with corrosion-resistant materials, ensuring a long lifespan and reducing maintenance needs. Furthermore, these units incorporate advanced safety features, including automatic shut-off systems and temperature monitoring, to guarantee safe operation in any environment.

The Desa TC80V and RCP80V are also designed with energy efficiency in mind. They meet and exceed industry standards for energy consumption, making them environmentally friendly choices that contribute to a company’s sustainability goals. With features such as programmable timers and energy-saving modes, they help reduce overall energy costs while delivering optimal performance.

In summary, the Desa TC80V and RCP80V are distinguished by their advanced technologies, user-friendly controls, exceptional durability, and energy-efficient operations. These models represent the future of heating and cooling solutions, making them ideal choices for businesses looking to invest in reliable and cost-effective equipment. Whether for heating or cooling needs, Desa has created a solution that combines innovation with practicality.