Hob Use (Continued)
Switching the appliance off | EN |
To completely switch off the appliance, use the “On / Off 
” control sensor.
Touch the “On / Off 
” sensor.
After switching off a single cooking zone or the entire cooking surface, the presence of residual heat will be indicated in the digital displays of the corresponding cooking zones in the form of an 
(for “hot”).
If the heat setting is at and 
you want to turn the 
burner off, the sensor can be touched one additional time, and the heat setting will go to zero.
For faster adjustment, keep your finger on the 
or 
sensor until the required value is obtained.
If more than one sensor is pressed for longer than 10 seconds, 
will show in the heat setting display. To reset, touch the “On / Off 
” sensor.
Switching a cooking zone off
To switch off a cooking zone, return the setting to 
by using the control panel’s heat setting and touch sensors 
or 
.
17