![](/images/new-backgrounds/1238465/23846565x1.webp)
Cleaning and Maintenance
Problem |
| Solution | |
|
|
| |
| • | Check whether the set temperature is higher in | |
|
| the Cool mode or lower in the Heat mode than | |
|
| the current temperature. Press the Temperature | |
|
| button on the remote control to change the set | |
|
| temperature. | |
| • | Check whether the air filter is blocked with | |
|
| dirt. If the air filter is blocked, the cooling and | |
|
| heating performance may decrease. Remove dirt | |
|
| regularly. | |
| • | Check if the outdoor unit is covered or installed | |
|
| near the obstacle. Take the cover off and take | |
|
| the obstacle away. When clearing the obstacle | |
|
| (e.g. snow or ice), use suitable tools so as to be | |
Cool/Warm air |
| careful not to damage the product nor injure | |
| yourself during this process. | ||
does not come |
| ||
• | Check whether the air conditioner is running | ||
out the air | |||
| the defrost function. When ice forms in winter | ||
conditioner or |
| ||
| or the outdoor temperature is too low, the | ||
performance is |
| ||
| air conditioner runs the defrost function | ||
reduced. |
| ||
| automatically. While this function is running, the | ||
|
| ||
|
| indoor fan stops and warm air does not come | |
|
| out. | |
| • | Check whether doors or windows are open. This | |
|
| may cause poor cooling or heating performance. | |
|
| Close the doors and windows. | |
| • | Check whether the air conditioner is turned | |
|
| on immediately after the cooling or heating | |
|
| operation stops. In this case, only the fan runs to | |
|
| protect the outdoor unit compressor. | |
| • | Check whether the pipe length is too long. When | |
|
| the pipe length exceeds the maximum pipe | |
|
| length, the cooling and heating performance | |
|
| may decrease. | |
|
|
|
32English