Cable Management, Display Installation | Chief Manufacturing PNRIWU

Installation Instructions

PNRIW / PNRIWU

Display Installation

WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING SEVERE PERSONAL INJURY OR DAMAGE TO EQUIPMENT! DO NOT install display in a manner other than that specified by the manufacturer. Certain displays may require the use of an interface bracket for proper installation of the display. If an interface bracket is not installed or there are any other questions regarding the installation of the display, immediately contact a Chief Customer Service representative by calling 800-582-6480 or by visiting www.chiefmfg.com.

WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING SEVERE PERSONAL INJURY OR DAMAGE TO EQUIPMENT. Displays can weigh in excess of 40 lbs (18.1kg). ALWAYS use two people and proper lifting techniques when installing display.

WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING SEVERE PERSONAL INJURY OR DAMAGE TO EQUIPMENT. Make sure mounting buttons on display are properly seated in mounting holes in faceplate.

To install display:

1.Move mount faceplate to extended position by grasping faceplate and pulling outward away from wall.

(See Figure 5)

2.While supporting both sides of display, align four mounting buttons on display or interface bracket with four mounting holes in faceplate. (See Figure 5)

3.Lower display into place listening for audible "click" to ensure recessed area of mounting buttons are properly seated in lower area of mounting holes and "click lock" mechanism has engaged. (See Figure 5) and

(See Figure 6)

Figure 5

NOTE: Holes are provided in the faceplate for use with a padlock or similar locking device, if desired. In addition, the pin and nut may be removed from the upper holes and moved to the lower holes for use as a more permanent locking device. (See Figure 6)

	Remove pin	2
	and nuts and	2
	and nuts and
	move to lower holes.
		3
		A padlock or bolt may
		be placed through latch
		holes

Figure 6

Cable Management

CABLE MANAGEMENT

WARNING: IMPROPER INSTALLATION CAN LEAD TO SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Make sure cables do not run through pinch points.

1.Loosen front and rear cable clamps on top arm. (See Figure 7)

2.Thread cable ties (M) under cable clamps and secure clamps to top arm. (See Figure 7)

3.Route power/audio/video cables through the cable channel in top arm (See Figure 7), allowing sufficient slack in cables for left/Right movement of display and swing arm and also swing arm extension and retraction.

4.Secure cables to top arm using two cable ties (M).

5.Repeat steps 1 through 4 for lower arm.

WARNING: IMPROPER INSTALLATION CAN LEAD TO SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! DO NOT route cables through holes in faceplate.

PNRIWU, PNRIW specifications

Chief Manufacturing has long been a leader in the realm of mounting solutions, offering innovative products that enhance the functionality and aesthetics of any workspace. Among its range of cutting-edge fixtures is the PNRIWU and PNRIW series, which come equipped with features tailored to meet contemporary demands in both commercial and residential environments.

The Chief PNRIWU and PNRIW models stand out due to their seamless integration of functionality and design. These mounts are crafted to support a plethora of display types, making them suitable for diverse applications, from corporate conference rooms to homes theaters. The ability to accommodate various screen sizes is one of the hallmark features of these products. They are engineered to securely hold flat panel displays, ensuring safety without compromising on viewing quality.

One of the most significant aspects of the PNRIWU and PNRIW series is their adjustable height feature. Users can easily modify the mounting height to suit individual preferences or adapt to different viewing scenarios. This adaptability is complemented by effortless tilt and swivel capabilities, providing users with optimal angles for viewing experiences. Whether for presentations, video conferencing, or casual watching, these mounts enhance comfort and usability.

The technological innovations embedded in the PNRIWU and PNRIW models enhance their operational efficiency. They come equipped with advanced cable management systems that help maintain a clean and organized setup. This technology not only prioritizes aesthetics but also ensures that users can navigate their setups without the hassle of tangled wiring.

Moreover, installation of the Chief PNRIWU and PNRIW is straightforward, catering to both DIY enthusiasts and professional installers. The mounts include comprehensive instructions and all necessary hardware, which minimizes time spent on setup and maximizes the time users can enjoy their displays.

In terms of durability, both models are constructed from high-quality materials designed to withstand the rigors of continuous use. This is crucial for environments that demand reliability, ensuring that the mounts perform consistently over time.

Overall, the Chief PNRIWU and PNRIW series exemplify the brand's commitment to quality, innovation, and user-centric design. With their versatile features, advanced technologies, and robust construction, these mounts are an excellent choice for anyone looking to elevate their display experience and optimize their workspace.