Samsung CTI613EHST/XEE manual Safety shutoff, Residual heat indicator

Page 14

Safety shutoff

If one of the cooking zones is not switched off or the heat setting is not adjusted after an extended period of time, that particular cooking zone will automatically switch itself off.

Any residual warmth will be indicated with (for “hot”) in the digital displays corresponding to the particular cooking zones.

The cooking zones switch themselves off at the following times.

Heat setting

Switch off

 

 

1-3

After 6 hours

 

 

4-6

After 5 hours

 

 

7-9

After 4 hours

 

 

10-15

After 1.5 hours

 

 

If the Hob is overheated because of abnormal operation, will be displayed. And the Hob will be switched off.

If cookware is unsuitable or too small or no cookware has been placed on the

cooking zone, will be displayed. And after 5 minutes the corresponding cooking zone will be switched off.

Should one or more of the cooking zones switch off before the indicated time has elapsed, see the section “Troubleshooting”.

Other reasons why a cooking zone will switch itself off

All cooking zones will immediately switch themselves off if liquid boils over and lands on the control panel.

The automatic shutoff will also be activated if you place a damp cloth on the control panel. In both of these instances, the appliance will need to be switched

on again using the main On/Off control sensor after the liquid or the cloth has been removed .

Residual heat indicator

When an individual cooking zone or the hob is turned off, the presence of residual heat is

shown with an (for “hot”) in the digital display of the appropriate cooking zones. Even after the cooking zone has been switched off, the residual heat indicator goes out only after the cooking zone has cooled.

You can use the residual heat for thawing or keeping food warm.

Important: As long as the residual heat indicator is illuminated, there is a risk of burns.

Important: If the power supply is interrupted, the symbol will go out and information about residual heat will no longer be available. However, it may still be possible to burn yourself. This can be avoided by always taking care when near the hob.

14_ parts and features

Image 14
Contents Induction Hob Using this manual Following symbols are used in the textChild safety Safety instructionsElectrical safety Safety during use Safety when cleaningProper disposal of your old appliance Disposal instructionsDisposing of the packaging material Contents Regulations and compliance Installing the hobSafety instructions for the installer Connecting to the mains power supply Installing into the countertop 100 Control panel Parts and features Cooking zones Induction heating Induction Hob Power Cable Installation Brackets ScrewsComponents Key features of your appliance Other reasons why a cooking zone will switch itself off Safety shutoffResidual heat indicator Before you begin Temperature detectionInitial cleaning SuITabIlITy TEsT Hob useCookwarE for InduCTIon CookIng zonEs SIzE of pansEnergy saving tips Using suitable cookwareUsing the touch control sensors Cover completelySwitching the appliance off Switching the appliance onSelect cooking zone and heat setting Switching the child safety lock on / off SwITChIng a CookIng zonE offUsIng ThE ChIld safETy loCk Timer Setting the safety shutoffCountdown timer Power boost controlPower Management ExampleSuggested settings for cooking specific foods Switch Setting Cookingmethod Examples for UseLight Soiling Cleaning and careHob Stubborn SoilingTo avoid damaging your appliance Problem DirtHob Frame Check for the following possibility Warranty and serviceFAQs and troubleshooting Service Is it a technical fault?Cooking rings Technical dataTechnical data Questions or COMMENTS? Code No. DG68-00188A
Related manuals
Manual 28 pages 21.79 Kb Manual 28 pages 49.29 Kb Manual 28 pages 23.77 Kb Manual 28 pages 8.46 Kb