Attaching Display to Cart

Installation Instructions

MFC, PFC Series

WARNING: EXCEEDING MAXIMUM WEIGHT CAPACITY MAY LEAD TO SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is the installer’s responsibility to ensure the total amount of weight placed on the cart does not exceed 125 lbs (56.70 kg) for the MFC, and 200 lbs (90.72 kg) for the PFC.

CAUTION: Before attaching display to cart set the brakes on the back wheels by pressing down on the tab.

(See Figure 5)

Press down to set brakes

Figure 5

1.Adjust the cart to the desired height by holding the top part of the post, pulling out knob on the center post and turning 90o in either direction to disengage the locking mechanism.

2.Raise or lower the center post, then turn the knob 90o either direction to engage the knob and lock the cart at desired height. (See Figure 6)

Do NOT let

display rest

here

Figure 7

WARNING: DISPLAY MAY WEIGH IN EXCESS OF 40 LBS! Always use two people and proper lifting techniques when installing or positioning display on cart.

5.Lower display into place listening for audible "click" to ensure recessed area of mounting buttons are properly seated in lower area of mounting holes. (See Figures 7 & 8)

WARNING: IMPROPER INSTALLATION CAN LEAD TO CART OR DISPLAY FALLING CAUSING SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Ensure mounting buttons are completely engaged in mounting holes.

NOTE: Holes are provided in the faceplate for use with a padlock or similar locking device, if desired. In addition, the pin and nut may be removed from the upper holes and moved to the lower holes for use as a more permanent locking device. (See Figure 8).

Figure 6

IMPORTANT ! : Set the height of the cart so the display does NOT rest on the lower part of the center post. (See Figure 6.) Always set the height so the knob is engaged in a hole in the center post.

3.	Attach a PSBU or MSBU interface bracket to the display
	following the instructions included with the bracket.
4.	While supporting both sides of display, align four mounting
	buttons on display or interface bracket with four mounting

May remove pin and nut and move to lower holes

A padlock or bolt may be placed through latch holes

holes in head assembly. (See Figures 7 and 8)

Figure 8

PFC Series, MFC Series specifications

Chief Manufacturing, a leader in providing innovative mounting solutions for digital displays, offers a variety of mounting products designed to meet the needs of commercial and residential applications. Among their standout offerings are the PFC Series and MFC Series mounts. These series are renowned for their robust construction, versatility, and advanced technology, ensuring that they cater to a wide array of display sizes and installation environments.

The PFC Series, known for its heavy-duty performance, is built to accommodate larger displays often used in professional setups. One of the primary features of the PFC Series is its superior weight capacity, which allows it to support screens weighing up to 300 pounds. This makes the PFC Series an ideal choice for large televisions and monitors found in conference rooms, auditoriums, and public displays. The series also incorporates an array of mounting styles, including flat, tilt, and full-motion options, granting users flexibility based on their specific needs.

Innovation is at the core of the PFC Series, with an emphasis on easy installation and adjustment. The mounts are designed with user-friendly features, such as pre-set hole patterns and built-in bubble levels, making it easier to achieve accurate alignment during installation. The incorporation of cable management systems keeps wires organized and hidden, enhancing the overall aesthetic of the installation.

On the other hand, the MFC Series is tailored for modular and collaborative workspaces. This series emphasizes flexibility and adaptability, featuring mounts that allow for quick adjustments and reconfigurations. The MFC Series is particularly beneficial in environments where displays need to be frequently moved or altered, such as in educational or corporate settings. These mounts support a variety of ganging configurations, making it simple to align multiple displays for a cohesive viewing experience.

Another standout feature of the MFC Series is its compatibility with various mounting surfaces, including desk mounts, wall mounts, and ceiling mounts. The series emphasizes ergonomic design, allowing end-users to adjust displays easily for optimal viewing angles. The incorporation of advanced gas spring technology enables smooth movement of the displays, ensuring that height adjustments can be made effortlessly.

In conclusion, Chief Manufacturing's PFC and MFC Series are excellent solutions for anyone seeking reliable, functional, and innovative mounting systems. With features catering to both heavy-duty requirements and flexible workspace configurations, these series represent the forefront of technology in the display mounting industry. They provide a perfect blend of sturdiness, versatility, and ease of use, fostering a seamless viewing experience in both static and dynamic environments.