Bruke programvaren
5.Angi et tastatur for datamaskinen.
6.Det neste skjermbildet er for å angi skjermen.
7.Først angir du en horisontal frekvens for skjermen. (Du kan angi frekvensen direkte.)
8.Angi en vertikal frekvens for skjermen. (Du kan angi frekvensen direkte.)
9.Angi modellnavnet til skjermen. Denne informasjonen påvirker ikke den faktisk utførelsen av X- Window.
10.Du er ferdig med oppsettet av skjermen. Kjør X-Window når du har angitt annen nødvendig maskinvare.
IRTOUCH
IRTouch Screen Control Panel
Double click the mark on the tabletop (as the following indication), or follow "Start" -> "All programs" -> "IRTouchSystems", and then click "IR TouchScreen Control Panel" and go to the Control Panel of the touchscreen as following.
General Control Panel menu
1.The control panel provides adjustment and configuration with USB and IR touchscreen of serial port and supports compatibility of multi-touchscreens at the same PC. This window shows the basic information of the touchscreen and calibration. If several touchscreens are mounted on the PC and status is set "multi-screens display", user may use the button [Select Monitor] and must choose monitor related to each touchscreen before calibration, otherwise the touchscreen won't work. The setting of multi-touchscreens at the same PC comprising of Steps: the butt mark will appear on the center of each monitor screen in master slave sequence operated by program after user clicks "Select Monitor". If does so, use may click the center of the butt mark so as to ac- knowledge the mounted-touchscreen. If there is no information of touchscreen on the monitor,