4.OPERATING INSTRUCTIONS
Navigating the Control Panel
Access control panel functions using the four panel buttons located directly underneath the LCD
Display.
|
|
|
|
|
|
|
|
Button | Function |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<MODE> | Used to access the menu or to return to a |
|
|
|
|
|
|
previous menu option |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
<UP> | Scrolls through menu options in ascending |
|
|
|
|
|
|
order |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
<DOWN> | Scrolls through menu options in descending |
|
|
|
|
|
|
order |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
| Used to select and store the current menu |
| MODE | UP | DOWN ENTER | ||
<ENTER> |
|
|
|
|
|
| |
|
|
|
|
|
| ||
or option within a menu |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
The Control Panel LED Display shows the menu items you select from the menu map on page #. When a menu function is selected, the display will show immediately the first available option for the selected menu function. To select a menu item, press <ENTER>.
Use the <UP> and <DOWN> buttons to navigate the menu map and menu options. Press the <ENTER> button to access the menu function currently displayed or to enable a menu option. To return to the previous option or menu without changing the value, press the <MODE> button.
Menu Functions
MAIN FUNCTION | SELECTION | DESCRIPTION |
|
| Use the <UP> button to change the strobe speed (first digit). |
|
| Use the <DOWN> button to change the rotation direction and |
|
| speed (second digit). |
|
| All programs can further be altered and customized by rotating |
|
| the 2 motor knobs below the display. |
|
| These will not work in master/slave operation. |
|
|
|
|
| Select any of these automatic programs to constantly change |
|
| effects, patterns, speeds, etc. |
Auto modes |
| These programs do not have manual adjustment and will not |
|
| work with the motor knobs below the display. |
|
| These programs will work in master/slave operation. |
|
|
|
|
| Use the <UP> button to change the strobe speed and patterns |
|
| (first & second digit). |
|
| Use the <DOWN> button to change the rotation direction and |
|
| speed (third digit). |
|
| Additional auto programs (alternating in master/slave |
|
| operation) |
|
|
|
|
| Laser responds to low frequencies picked up by the internal |
Sound |
| microphone. |
|
| Use the sound knob to adjust the sensitivity of the microphone. |
|
|
|
Slave |
| Sets the fixture into slave mode. |
|
|
|
Scorpion™ Storm MG User Manual | 12 | 4/27/2009 5:11 PM |