washing a load of laundry
My cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one button convenience.
By pushing the My Cycle(
) button, press the My Cycle button to load and use the saved My Cycle options. The “My Cycle” light will indicate activation. Also, the chosen course and option lights will fllicker.
You can set all options as follows in the My Cycle mode.
1.Turn the water supply on.
2.Press the Power( 
) button.
3.Select cycle using the Cycle Selector.
4.After cycle selection, set each option.
See the “Cycle Chart” on page 37 for available option settings with each cycle.
5.You can then store the selected cycle and options by pressing and holding the My Cycle(
) button for longer than 3 seconds in My Cycle mode. The cycle and options you select will be displayed the next time you choose the My Cycle function.
You can change the My Cycle settings by repeating the same process above. The last used setting will be displayed the next time you choose the My Cycle function.
If you press My Cycle and release it within 3 seconds, the previously saved course and options appear. If you press and hold My Cycle for 3 second or longer, the currently set course and options are saved and the LED blinks for 3 seconds.
Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control” automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed.
1.Turn on your sink’s water tap.
2.Press the Power( 
) button on the washing machine.
3.Open the door.
4.Load the articles loosely into the drum one at a time, without overfilling it.
5.Close the door.
6.Add detergent and, if necessary, softener or prewash detergent, into the appropriate
compartments.
), Synthetics(
), Denim(
), Bedding(
), Dark Garment(
), Daily Wash(
), Baby Care(
), Sports Wear(
) cycles. It is only necessary if your clothing is heavily soiled.
7.Use the Cycle Selector to select the appropriate cycle according to the type of material:
Cotton(
), Synthetics(
), Denim(
), Bedding(
), Dark Garment(
), Daily Wash(
), Eco Drum Clean(
), Baby Care(
), Sports Wear(
), Hand Wash(
), Wool(
). The relevant indicators will illuminate on the control panel.
8.At this time, you can control the wash temperature, the amount of rinses, the spinning speed, and the delay time by pressing the appropriate option button.
9.Press the Start/Pause( 
) button and the wash will begin. The process indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1.Press the Start/Pause( 
) button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2.After closing the door, press the Start/Pause( 
) button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1.Open the door.
2.Remove laundry.
26_ washing a load of laundry