Samsung WD80M4433IW/EE, WD70M4433IW/EE, WD70M4433JW/EE, WD80M4433JW/EE manual LC1

Problem		Action
	Water is overflowed.
OC	•	Restart after spinning.
	•	If the information code remains on the display, contact a local
		Samsung service centre.
	Check the drain hose.
LC	• Make sure the end of the drain hose is placed on the floor.
	•	Make sure the drain hose is not clogged.
	• If the information code remains, contact a customer service
		centre.
		NOTE
LC1		When the washer displays the “LC”/“LC1” code, the washer
		do draining for 3 minutes. During this time, the Power
		button is inoperative.
	Check the fan motor.
FC	•	Power off and power the machine on after 2-3 minutes, and
		then try again.
	Spinning does not work.
	• Make sure laundry is spread out evenly.
UB	• Make sure the washing machine is on a flat, stable surface.
	•	Redistribute the load. If only one item of clothing needs
		washing, such as a bathrobe or pair of jeans, the final spin
		result might be unsatisfactory, and an “UB” check message
		will be shown in the display.
	Check the Motor for operation.
3C	• Try restarting the cycle.
	•	If the information code remains, contact a customer service
		centre.

The electronic control needs to be checked (Over Voltage Error).

•Check the PCB and wire harness.

•Check if power is supplied properly.

•If the information code remains, contact a customer service

UC centre.

Low voltage detected

•Check if the power cord is plugged in.

•If the information code remains, contact a customer service centre.

Troubleshooting

English  53

WD80(70)M4433JW_03786J-00_EN.indd 53

2017/2/23 16:00:08